Phoenix QUINT-PS/24DC/24DC/10-DC/DC converter 2320092, QUINT DC/DC converter for rail installation, primary switching mode, using SFB technology (selective fusing technology), input: 24V DC, output: 24V DC/10 A
| DC operation | |
| Rated input voltage range | 24V DC |
| Input Voltage Range | 18V DC ... 32V DC |
| operation | 14V DC ... 18V DC (attenuation) |
| Wide Input | No |
| DC input voltage range | 18V DC ... 32V DC |
| 14V DC ... 18V DC (consider attenuation during operation) | |
| Supply Voltage | DC |
| Impulse current | < 15 A (typical) |
| impulse current integral (I2t) | < 2.7 A2s |
| grid buffer time | > 12 ms (24V DC) |
| power consumption | 14 A (24 V, IBOOST) |
| prevents polarity reversal | ≤ 30V DC |
| protection circuit | transient surge protection; varistor |
| input fuse | 25 A (built-in (equipment protection)) |
| recommend use | 16 A ... 20 A (characteristics B, C, D, K) |
| efficiency | > 92% |
| output characteristics | U/ I |
| Rated output voltage | 24V DC ±1% |
| output voltage (USet) setting range | 18V DC ... 29.5V DC (> 24V DC, stable capacity limit) |
| Rated output current (IN) | 10 A (-25°C ... 60 °C) |
| POWER BOOST (IBoost) | 12.5 A (-25°C ... 40°C constant, UOUT= 24V DC) |
| selective fusing (ISFB) | 60 A (12 ms) |
| Type of thermal magnetic circuit breaker | B2 / B4 / B6 / C2 / C4 |
| Attenuation | 60°C ... 70°C (2.5 %/K) |
| feedback voltage resistance | 35V DC |
| output | < 35V DC |
| Maximum capacitive load | Unlimited |
| Active Current Limit | about 18 a |
| control deviation | <1% (load change, static 10%... 90%) |
| <2% (change of load, dynamic 10%... 90%) | |
| < 0.1 % (input voltage variation is ± 10 %) | |
| residual wave | < 20 mVSS |
| output power | 240W |
| peak switching voltage rated load | < 10 mVSS(20 MHz) |
| maximum no-load power consumption | 1.6W |
| Maximum rated load power loss | 24W |
| rise time | < 2 ms (UOUT(10%... 90%)) |
| and connect | Yes, for redundancy and increased capacity |
| Concatenation | is |
| 2 (Equipment) | |
| signal: DC OK active | |
| Output Description | UOUT>0.9xUN: High Signal |
| Switching voltage range | 18V DC ... 24V DC |
| Maximum starting current | < 20 mA (short circuit protection) |
| signal: POWER BOOST, active | |
| Output Description | IOUTN: High signal |
| Switching voltage range | 18V DC ... 24V DC |
| Maximum starting current | < 20 mA (short circuit protection) |
| signal: UINOK, activate | |
| Output Description | UIN> 19.2V: high signal |
| Switching voltage range | 18V DC ... 24V DC |
| Maximum starting current | ≤ 20 mA (short-circuit protection) |
| signal: DC OK floating point | |
| Output Description | relay |
| output voltage | ≤ 30V AC/DC |
| Maximum starting current | ≤ 100 mA |
Phoenix QUINT-PS/24DC/24DC/10-DC/DC Converter 2320092
Created on：2025-02-10 14:37
