Phoenix QUINT-PS/3AC/24DC/ 5-power supply 2866734, primary switching power supply QUINT POWER, pluggable screw connection, SFB Technology (Selective Fuse Breaking), input: 3 phases, output: 24V DC/5 A
| AC operation | |
| Rated input voltage range | 3x 400V AC ... 500V AC |
| Input Voltage Range | 3x 320V AC ... 575V AC |
| 2x 360V AC ... 575V AC | |
| 450V DC ... 800V DC | |
| Supply Voltage | AC/DC |
| Impulse current | < 15 A (typical) |
| impulse current integral (I2t) | < 1 A2s |
| AC frequency range | 45Hz ... 65Hz |
| DC frequency range | 0Hz |
| grid buffer time | > 20 ms (400V AC) |
| > 30 ms (500V AC) | |
| power consumption | 3x 0.8 A (400V AC) |
| 3x 0.7 A (500V AC) | |
| 0.2 A (600V DC) | |
| Rated power consumption | 268 VA |
| protection circuit | transient surge protection; varistor, gas discharge tube |
| power factor (cos phi) | 0.5 |
| Typical Response Time | < 0.06 s |
| Allowable Spare Fuses | B6 B10 B16 AC: |
| Allowed DC Spare Fuses | DC: Connect a suitable fuse |
| recommend use | 6 A ... 16 A (AC: characteristics B, C, D, K) |
| PE discharge current | < 3.5 mA |
| efficiency | > 89% (at 400V AC and rated) |
| output characteristics | U/ I |
| Rated output voltage | 24V DC ±1% |
| output voltage (USet) setting range | 18V DC ... 29.5V DC (> 24V DC, stable capacity limit) |
| Rated output current (IN) | 5 A (-25°C ... 60 °C,UOUT= 24V DC) |
| POWER BOOST (IBoost) | 7.5 A (-25°C ... 40°C constant, UOUT= 24V DC) |
| selective fusing (ISFB) | 30 A (12 ms) |
| Type of thermal magnetic circuit breaker | B2 / B4 / C2 |
| Attenuation | 60°C ... 70°C (2.5 %/K) |
| feedback voltage resistance | Max 35V DC |
| output | < 35V DC |
| residual wave | < 20 mVSS(rated value) |
| output power | 120W |
| peak switching voltage rated load | < 20 mVSS(rated, 20MHz) |
| maximum no-load power consumption | 4W |
| Maximum rated load power loss | 14W |
| rise time | < 0.04 s (UOUT(10%... 90%)) |
| and connect | Yes, for redundancy and increased capacity |
| Concatenation | is |
| signal: DC OK active | |
| Output Description | UOUT>0.9xUN: High Signal |
| Switching voltage range | 18V DC ... 24V DC |
| Maximum starting current | ≤ 20 mA (short-circuit protection) |
| Continuous load current | ≤ 20 mA |
| signal: DC OK floating point | |
| Output Description | relay contacts, UOUT>0.9xUN: contact attraction |
| maximum switching voltage | 30V AC/DC |
| 24V DC | |
| Maximum starting current | 0.5 A |
| 1 A | |
| Continuous load current | ≤ 1 A |
| signal: POWER BOOST, active | |
| Output Description | IOUTN: High signal |
| Switching voltage range | 18V DC ... 24V DC |
| output voltage | +24V DC |
| Maximum starting current | ≤ 20 mA (short-circuit protection) |
| Continuous load current | ≤ 20 mA |
Phoenix QUINT-PS/3AC/24DC/ 5-Power 2866734
Created on：2025-02-11 15:25
