Phoenix QUINT-PS/3AC/24DC/40-power supply 2866802, primary switching power supply QUINT POWER, screw connection, DIN rail installation, SFB Technology (Selective Fuse Breaking), input: 3 phases, output: 24V DC/40 A
| AC operation | |
| Rated input voltage range | 3x 400V AC ... 500V AC |
| Input Voltage Range | 3x 400V AC ... 500V AC -20 % ... +15% |
| Supply Voltage | AC/DC |
| Impulse current | < 15 A (at 25°C) |
| impulse current integral (I2t) | < 1 A2s |
| Surge current limit | 15 A |
| AC frequency range | 45Hz ... 65Hz |
| DC frequency range | 0Hz |
| grid buffer time | > 25 ms (400V AC) |
| > 35 ms (500V AC) | |
| power consumption | 3x 2.1 A (400V AC) |
| 3x 1.7 A (500V AC) | |
| Rated power consumption | 1342 VA |
| protection circuit | transient surge protection; varistor, gas discharge tube |
| power factor (cos phi) | 0.76 |
| Typical Response Time | < 0.5 s |
| Allowable Spare Fuses | B6 B10 B16 AC: |
| Allowed DC Spare Fuses | DC: Connect a suitable fuse |
| recommend use | 6 A ... 20 A (characteristics B, C, D, K or similar) |
| PE discharge current | < 3.5 mA |
| DC operation | |
| Rated input voltage range | 500V DC ... 600V DC |
| Input Voltage Range | 500V DC ... 600V DC -10 % ... +33 % (mid-point earthed) |
| power consumption | 2.2 A (500V DC) |
| 1.9 A (600V DC) | |
| recommend use | 1x 6 A ≥ 1000V DC (10 x 38 mm, 30 kA L/R = 2 ms) |
| efficiency | 94% typical (400V AC) |
| output characteristics | U/ I |
| Rated output voltage | 24V DC ±1% |
| output voltage (USet) setting range | 18V DC ... 29.5V DC (> 24V DC, stable capacity limit) |
| Rated output current (IN) | 40 A |
| POWER BOOST (IBoost) | 45 A (-25°C ... 40°C constant, UOUT= 24V DC) |
| Static Boost (IStat.Boost) | 45 A |
| selective fusing (ISFB) | 215 A (12 ms) |
| Type of thermal magnetic circuit breaker | B2 / B4 / B6 / B10 / B16 / B25 / C2 / C4 / C6 / C13 |
| Attenuation | 60°C ... 70°C (2.5 %/K) |
| feedback voltage resistance | ≤ 35V DC |
| output | ≤ 35V DC |
| control deviation | <1% (load change, static 10%... 90%) |
| <3% (load change, dynamic 10%... 90%) | |
| < 0.1 % (input voltage variation is ± 10 %) | |
| residual wave | < 40 mVSS(rated value) |
| Short-circuit protection | is |
| output power | 960W |
| 1080W | |
| peak switching voltage rated load | < 5 mVSS(rated, 20MHz) |
| maximum no-load power consumption | 18W |
| Maximum rated load power loss | 63W |
| rise time | < 0.15 s (UOUT(10%... 90%)) |
| and connect | Yes, for redundancy and increased capacity |
| Concatenation | is |
| signal: DC OK active | |
| Output Description | UOUT>0.9xUN: High Signal |
| Switching voltage range | 18V DC ... 24V DC |
| output voltage | +24V DC |
| Maximum starting current | ≤ 20 mA (short-circuit protection) |
| Continuous load current | ≤ 20 mA |
| signal: DC OK floating point | |
| Output Description | relay contacts, UOUT>0.9xUN: contact attraction |
| maximum switching voltage | 30V AC/DC |
| 24V DC | |
| Maximum starting current | 0.5 A |
| 1 A | |
| Continuous load current | ≤ 1 A |
| signal: POWER BOOST, active | |
| Output Description | IOUTN: High signal |
| Switching voltage range | 18V DC ... 24V DC |
| output voltage | +24V DC |
| Maximum starting current | ≤ 20 mA (short-circuit protection) |
| Continuous load current | ≤ 20 mA |
Phoenix QUINT-PS/3AC/24DC/40-Power 2866802
Created on：2025-02-11 15:31
