| Product Type | System Cable |
| environmental conditions | |
| protection level | IP20 |
| protection level (installation position) | ≥ IP54 (installation position) |
| ambient temperature (operation) | -40°C ... 70°C (fixed installation) |
| -10°C ... 70°C (movable installation) | |
| ambient temperature (storage/transport) | -40°C ... 80°C |
| elevation | ≤ 2000 m |
| Nominal operating voltage (AC) | ≤ 30V AC |
| Nominal operating voltage (DC) | ≤ 60V DC |
| Rated operating mode | 100% Eligible |
| current (per path) | ≤ 2 A (expanded, see attenuation) |
| Supported Controllers ABB S800 I/O | |
| Applicable I/O Card | DI810 |
| DI811 | |
| DI814 | |
| DI818 | |
| DI830 | |
| DI831 | |
| DI840 | |
| DI885 | |
| DO810 | |
| DO814 | |
| DO818 | |
| DO840 | |
| DP820 | |
| DP840 | |
| AI810 | |
| AI820 | |
| AI830 | |
| AI835 | |
| AI845 | |
| AO810 | |
| AO820 | |
| Cable Length | 3 m |
| 25X0.25 [PVC] | |
| UL AWM | 2464/1061 |
| Bits | 25 |
| Shielding | have |
| Cable Type | 25X0.25 [PVC] |
| Wire Model | prefabricated circular shielded cable |
| wire structure signal line | 14x 0.15mm |
| AWG, signal wire | 24 |
| Wire Cross Section | 25x 0.25 mm² |
| wire diameter, including insulation | 1.2mm ± 0.05mm |
| Cable outer diameter | 9.80mm ± 0.5mm |
| outer sheath, material | semi-rigid PVC |
| outer sheath, color | Grey |
| Wire Material | copper stranded wire |
| Cable resistance | ≤ 80 Ω/km (at 20°C) |
| insulation resistance | ≥ 20 MΩ * km (at 20°C) |
| minimum bending radius, fixed mounting | 82mm |
| minimum bending radius, mobile installation | 155mm |
| Dynamic Load Capacity (Bending) | : 5000 (radius ≥ 15x outer diameter) |
| Halogen-free | No |
| flame retardant | IEC 60332-1-2 (bare cable) |
| VDE 0842, Part 332-1-2 (Bare cables) | |
| IEC 60332-3-22 (bare cable) | |
| UL VW-1 | |
| CSA FT-1 | |
| oil resistance | Resistance to occasional welding chip spatter (bare cable) |
| Cable Type | cables for connecting modules |
Phoenix CABLE-D25SUB/B/S/300/KONFEK/S-Cable 2302162
Created on：2025-02-12 15:09
