Phoenix MINI MCR-SL-UI-UI-NC-isolation amplifier 2864150,3-terminal signal isolation transmitter, used for galvanic isolation of analog signals, I/O can be configured by DIP switch, screw connection, standard configuration
| Use Restrictions | |
| EMC Description | EMC: Class A products, see the manufacturer's declaration in the download area |
| Product Type | isolation amplifier |
| product series | MINI Analog |
| Channels | 1 |
| configuration | DIP switch |
| insulation characteristics | |
| Overvoltage Category | II |
| pollution level | 2 |
| electrical isolation | Foundation isolation according to EN 61010 |
| galvanic isolation between input and output | is |
| cut-off frequency (3dB) | about 100Hz |
| rated conditions | 58 mW |
| 184.3 mW | |
| protection circuit | transient protection |
| step response (10-90%) | 3.2 ms |
| maximum temperature coefficient | < 0.01 %/K |
| temperature coefficient, typical | < 0.002 %/K |
| Maximum transmission error | ≤ 0.1 % (of terminal value) |
| < 0.4 % (without mediation) | |
| Electrical isolation input/output/power supply | |
| Rated insulation voltage | 50V AC/DC |
| Test Voltage | 1.5 kV AC (50 Hz, 60 s) |
| Power | |
| Rated supply voltage | 24V DC |
| Supply Voltage Range | 19.2V DC ... 30V DC (DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, order number 2869728) can be used to bridge the power supply. Can be stuck to a 35mm DIN rail conforming to the EN60715 standard)) |
| Maximum current consumption | < 19 mA (current output under load at 24V DC) |
| < 9 mA (voltage output under load at 24V DC) | |
| power consumption | < 450 mW (current output) |
| < 200 mW (voltage output) | |
| signal: current/voltage | |
| Input Number | 1 |
| configurable/programmable | Yes, not configured |
| voltage input signal | 0V ... 10V |
| 0V ... 5V | |
| 1V ... 5V | |
| 2V ... 10V | |
| Maximum voltage input signal | 30V |
| current input signal | 0 mA ... 20 mA |
| 4 mA ... 20 mA | |
| Maximum current input signal | 50 mA |
| input voltage | about 100 kΩ |
| input current | approx. 50 Ω |
| signal: current/voltage | |
| outputs | 1 |
| configurable/programmable | Yes, not configured |
| voltage output signal | 0V ... 10V |
| 0V ... 5V | |
| 1V ... 5V | |
| 2V ... 10V | |
| Maximum voltage output signal | about 12.5V |
| No-load voltage | about 12.5V |
| current output signal | 0 mA ... 20 mA |
| 4 mA ... 20 mA | |
| Maximum current output signal | 28 mA |
| short-circuit current | approx. 22 mA |
| load/output load voltage output | ≥ 10 kΩ |
| load/output load current output | < 500 Ω (when 20 mA) |
| fluctuation | < 20 mVSS(at 500 Ω) |
| < 20 mVSS(at 10 kΩ) | |
| Connection Mode | screw connection |
| stripping length | 12mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Connectable Guide Cross Section AWG | 26 ... 12 |
Phoenix MINI MCR-SL-UI-UI-NC-Isolation Amplifier 2864150
Created on：2025-02-12 15:33
