Phoenix QUINT-PS/3AC/48DC/20-power supply 2320827, primary switching power supply QUINT POWER, screw connection, DIN rail installation, SFB Technology (Selective Fuse Breaking), input: 3 phases, output: 48V DC/20 A
| AC operation | |
| Rated input voltage range | 3x 400V AC ... 500V AC |
| Input Voltage Range | 3x 400V AC ... 500V AC -20 % ... +15% |
| Supply Voltage | AC/DC |
| Impulse current | < 20 A (typical) |
| impulse current integral (I2t) | < 1 A2s |
| Surge current limit | 20 A |
| AC frequency range | 45Hz ... 65Hz |
| DC Frequency Range | 0Hz |
| grid buffer time | > 25 ms (400V AC) |
| > 35 ms (500V AC) | |
| power consumption | 3x 2.1 A (400V AC) |
| 3x 1.7 A (500V AC) | |
| 1.7 A (600V DC) | |
| Rated power consumption | 1386 VA |
| protection circuit | transient surge protection; varistor |
| Typical Response Time | < 1 s |
| Allowable Spare Fuses | B6 B10 B16 AC: |
| Allowed DC Spare Fuses | DC: Connect a suitable fuse |
| recommend use | 6 A ... 20 A (characteristics B, C, D, K or similar) |
| PE discharge current | < 3.5 mA |
| DC operation | |
| Rated input voltage range | 500V DC ... 600V DC |
| Input Voltage Range | 500V DC ... 600V DC -10 % ... +33 % (mid-point earthed) |
| power consumption | 2.2 A (500V DC) |
| 1.9 A (600V DC) | |
| recommend use | 1x 6 A ≥ 1000V DC (10 x 38 mm, 30 kA L/R = 2 ms) |
| efficiency | Typical 93% (400V AC) |
| output characteristics | U/ I |
| Rated output voltage | 48V DC ±1% |
| output voltage (USet) setting range | 30V DC ... 56V DC (> 48V DC, limited stable capacity) |
| Rated output current (IN) | 20 A |
| POWER BOOST (IBoost) | 22.5 A (-25°C ... 40°C constant, UOUT= 48V DC) |
| Static Boost (IStat.Boost) | 22.5 A |
| selective fusing (ISFB) | 100 A (12 ms) |
| Type of thermal magnetic circuit breaker | B2 / B4 / B6 / B10 / C2 / C4 / C6 |
| Attenuation | 60°C ... 70°C (2.5 %/K) |
| feedback voltage resistance | maximum 60V DC |
| output | < 60V DC |
| Active Current Limit | IBOOSTapprox. 22.5A (in case of short circuit) |
| control deviation | <1% (load change, static 10%... 90%) |
| <4% (load change, dynamic 10%... 90%) | |
| < 0.1 % (input voltage variation is ± 10 %) | |
| residual wave | < 50 mVSS(rated value) |
| output power | 960W |
| 1080W | |
| maximum no-load power consumption | 24W |
| Maximum rated load power loss | 70W |
| rise time | < 0.5 ms (UOUT(10%... 90%)) |
| and connect | Yes, for redundancy and increased capacity |
| Concatenation | is |
Phoenix QUINT-PS/3AC/48DC/20-Power 2320827
Created on：2025-02-13 16:17
