Phoenix AXL E PN DI8 DO4 2A M12 6P-Digital quantity module 2701512,Axioline E, digital quantity I/O device, PROFINET,M12 connector, digital input: 8,24V DC, connection technology: 4 wires, digital output: 4,24V DC, connection technology: 3 wires, plastic housing, protection level: IP65/IP67
| width |
60mm |
| height |
185mm |
| depth |
30.5mm |
| hole spacing |
198.5mm |
| Notes on dimensional data |
height is 212mm including the retaining clip. |
| Application Description |
| Application Description |
for industrial applications only |
| Use Restrictions |
| EMC Description |
EMC: Class A products, see the manufacturer's declaration in the download area |
| Shell Material |
Pocan® |
| color |
dark gray |
| PROFINET |
| interfaces |
2 |
| Connection Mode |
M12 Connector |
| Connection Method Considerations |
D coding |
| Bits |
4 |
| transmission speed |
100 Mbps (Adaptive) |
| PROFINET |
| Device Type |
PROFINET-Device |
| System Specific Protocol |
PROFINET Transfer Protocol LLDP |
| PROFINET Transfer Protocol MRP Client |
| PROFINET Transfer Protocol DCP |
| PROFINET Transfer Protocol DCE/RPC |
| Supported Protocols |
SNMP v1 |
| HTTP |
| TFTP |
| FTP |
| digital quantity: |
| Enter Name |
Digital Input |
| Input Description |
EN 61131-2 types 1 and 3 |
| Input Quantity |
8 |
| Cable Length |
max. 30 m (to sensor) |
| Connection Mode |
M12 pin plug connector, dual channel slot |
| connection system |
4 lines |
| input voltage range, "0" signal |
0V DC ... 5V DC |
| input voltage range, "1" signal |
11V DC ... 30V DC |
| Rated input voltage UIN |
24V DC |
| Rated input current UIN |
Typical 3 mA |
| sensor current per channel |
typical value 75 mA (from US) |
| Total sensor current |
Maximum 0.6 A (per device) |
| input filter time |
< 1000 µs |
| protection circuit |
overload protection, sensor power short circuit protection |
| digital quantity: |
| Output Name |
Digital Output |
| Connection Mode |
M12 connector, A- code |
| connection system |
3 lines |
| outputs |
4 |
| protection circuit |
output; Yes |
| output voltage |
24V DC |
| Voltage limitation due to current interruption |
-28V ... -17V |
| the maximum output current per channel |
2 A |
| Rated output voltage |
24V DC (from voltage UA) |
| Output Voltage Range |
18V DC ... 31.2V DC |
| is disconnected |
max. 1V |
| is disconnected |
max. 20 & micro;A |
| load rating, inductive |
48 VA (1.2 H,48 Ω, rated voltage) |
| Rated load, resistive |
48W (48Ω, rated voltage) |
| Switching frequency |
maximum 5500 per second (load current not less than 50 mA) |
| max. 1 second (with inductive load) |
| reverse voltage against short pulses |
Prevent reverse voltage |
| overload behavior |
automatic restart |
| signal delay |
maximum 150 & micro;s (at power-up) |
| maximum 200 & micro;s (when switched off) |
| overcurrent shutdown |
Minimum 2.2 A |
| Product Type |
I/O components |
| product series |
Axioline E |
| type |
Stand-Alone |
| special nature |
plastic housing |
