Phoenix VAL-SEC-T2-1S-350-FM-2 surge protector 2905333, plug-in surge protector, conforms to Class 2/Class II, used for single-phase power network, zero-ground separation (3-wire system: L1, N, PE), with Remote communication contact.
| Product Type | surge protector |
| Product Series | SEC Family |
| IEC Category | II |
| T2 | |
| EN Type | T2 |
| IEC power supply system | TN-S |
| TT | |
| type | DIN rail module, split, detachable |
| Bits | 2 |
| Surge protection fault alarm | visual status indication window and remote alarm contact |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated frequency fN | 50Hz (60 Hz) |
| indicator/remote signaling | |
| Connection Name | Remote alarm contact |
| switching function | changeover contact |
| Nominal operating voltage | 5V AC ... 250V AC |
| 125V DC (200 mA DC) | |
| Operating current | 5 mA AC ... 1 A AC |
| 1 A DC (30V DC) | |
| Connection Mode | screw connection |
| thread | M5 |
| Tightening torque | 4.5 Nm |
| stripping length | 16mm |
| Flexible Wire Cross Section | 2.5 mm² ... 16 mm² |
| Rigid conductor cross section | 2.5 mm² ... 25 mm² |
| Attachable Guide Cross Section AWG | 12 ... 4 |
| Connection Mode | fork cable end |
| Flexible Wire Cross Section | 1.5 mm² ... 6 mm² |
| Remote alarm contact | |
| Connection Mode | COMBICON in-line/screw connection |
| thread | M2 |
| Tightening torque | 0.25 Nm |
| stripping length | 7mm |
| Flexible Wire Cross Section | 0.14 mm² ... 1.5 mm² |
| Rigid conductor cross section | 0.14 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG | 28 ... 16 |
| Dimensional drawing | |
| width | 25.4mm |
| height | 97.9mm |
| depth | 74.5mm (7.5mm with DIN rail) |
| Horizontal stitch pitch | 1.4 Partition |
Phoenix VAL-SEC-T2-1S-350-FM-2 class surge protector 2905333
Created on：2025-02-18 15:12
