Phoenix STEP-PS/ 1AC/48DC/2-power supply 2868680, primary switch mode STEP POWER power supply, screw connection, support DIN rail installation, input: single phase, output 48V DC/2 A, can be adjusted between 30V DC ... 56V DC, power over Ethernet application power up to 96W

AC operation
Rated input voltage range 100V AC ... 240V AC
Input Voltage Range 85V AC ... 264V AC
95V DC ... 250V DC
AC input voltage range 85V AC ... 264V AC
DC input voltage range 95V DC ... 250V DC
Supply Voltage AC/DC
Impulse current < 15 A (typical)
impulse current integral (I2t) < 1.4 A2s
AC frequency range 45Hz ... 65Hz
DC Frequency Range 0Hz
grid buffer time Typical 20 ms (120V AC)
Typical 120 ms (230V AC)
power consumption 1.3 A (120V AC)
0.8 A (230V AC)
Rated power consumption 174.9 VA
protection circuit transient surge protection; varistor
power factor (cos phi) 0.61
Typical Response Time < 0.5 s
input fuse 4 A (slow fuse, internal)
recommend use 6 A ... 16 A (characteristics B, C, D, K)

efficiency > 90% (230V AC and rated)
output characteristics U/ I
Rated output voltage 48V DC
output voltage (USet) setting range 30V DC ... 56V DC (> 48V DC, limited stable capacity)
Output current Imax 3.5 A
Rated output current (IN) 2 A (-25°C ... 55 °C)
2.2 A (-25°C ... 40°C constant)
Attenuation 55°C ... 70°C (2.5 %/K)
feedback voltage resistance ≤ 60V DC
output < 60V DC
control deviation <1% (load change, static 10%... 90%)
<2% (change of load, dynamic 10%... 90%)
< 0.1 % (input voltage variation is ± 10 %)
residual wave < 30 mVSS(20 MHz)
output power 96W
peak switching voltage rated load < 30 mVSS(20 MHz)
maximum no-load power consumption < 0.9W
Maximum rated load power loss 9.6W
rise time < 0.5 s (UOUT(10%... 90%))
and connect Yes, for redundancy and increased capacity
Concatenation is

Input
Connection Mode screw connection
Minimum cross section of rigid conductor 0.2 mm²
Maximum cross section of rigid conductor 2.5 mm²
flexible lead 0.2 mm²
Flexible lead maximum cross section 2.5 mm²
Minimum Wire Cross Section AWG 24
Maximum conductor cross section AWG 12
stripping length 6.5mm
thread M3
Minimum tightening torque 0.5 Nm
Maximum tightening torque 0.6 Nm

Phoenix STEP-PS/ 1AC/48DC/2-Power 2868680

ꄴPrevious： null
ꄲNext： null
Created on：2025-02-18 15:13

News Dynamics

NEWS

▼