Phoenix QUINT-PS/1AC/48DC/20-power supply 2866695, primary switching power supply QUINT POWER, screw connection, SFB Technology (Selective Fuse Breaking), input: 1 phase, output: 48V DC/20 A
| AC operation | |
| Rated input voltage range | 100V AC ... 240V AC |
| 120V DC ... 300V DC (UL 508: ≤ 250V DC) | |
| Input Voltage Range | 85V AC ... 264V AC |
| 90V DC ... 300V DC (UL 508: ≤ 250V DC) | |
| AC input voltage range | 85V AC ... 264V AC |
| DC input voltage range | 90V DC ... 300V DC (UL 508: ≤ 250V DC) |
| maximum dielectric strength | 300V AC |
| Supply Voltage | AC/DC |
| Impulse current | < 15 A (typical) |
| impulse current integral (I2t) | < 1.6 A2s |
| AC frequency range | 45Hz ... 65Hz |
| DC Frequency Range | 0Hz |
| grid buffer time | Typical 20 ms (120V AC) |
| Typical 22 ms (230V AC) | |
| power consumption | 8.7 A (120V AC) |
| 4.5 A (230V AC) | |
| 9.4 A (110V DC) | |
| 4.6 A (220V DC) | |
| Rated power consumption | 1046 VA |
| protection circuit | transient surge protection; varistor |
| Typical Response Time | < 0.65 s |
| input fuse | 20 A (fast fuse, built-in) |
| Allowable Spare Fuses | B16 B25 AC: |
| Allowed DC Spare Fuses | DC: Connect a suitable fuse |
| recommend use | 6 A ... 16 A (AC: characteristics B, C, D, K) |
| PE discharge current | < 3.5 mA |
| efficiency | > 93% (230V AC and rated) |
| Rated output voltage | 48V DC ±1% |
| output voltage (USet) setting range | 30V DC ... 56V DC (> 48V DC, limited stable capacity) |
| Rated output current (IN) | 20 A (-25°C ... 60 °C,UOUT= 48V DC) |
| POWER BOOST (IBoost) | 22.5 A (-25°C ... 40°C constant, UOUT= 48V DC) |
| selective fusing (ISFB) | 100 A (12 ms) |
| Type of thermal magnetic circuit breaker | B2 / B4 / B6 / B10 / C2 / C4 / C6 |
| Attenuation | 60°C ... 70°C (2.5 %/K) |
| feedback voltage resistance | maximum 60V DC |
| output | < 60V DC |
| Active Current Limit | IBOOSTapprox. 22.5A (in case of short circuit) |
| control deviation | <1% (load change, static 10%... 90%) |
| <3% (load change, dynamic 10%... 90%) | |
| < 0.1 % (input voltage variation is ± 10 %) | |
| residual wave | < 50 mVSS(rated value) |
| output power | 960W |
| maximum no-load power consumption | 12W |
| Maximum rated load power loss | 74W |
| rise time | < 0.05 s (UOUT(10%... 90%)) |
| and connect | Yes, for redundancy and increased capacity |
| Concatenation | is |
| signal: DC OK active | |
| Output Description | UOUT>0.9xUN: High Signal |
| Switching voltage range | 18V DC ... 24V DC |
| Maximum starting current | ≤ 20 mA (short-circuit protection) |
| Continuous load current | ≤ 20 mA |
| signal: DC OK floating point | |
| Output Description | relay contacts, UOUT>0.9xUN: contact attraction |
| maximum switching voltage | 30V AC/DC |
| 24V DC | |
| Maximum starting current | 0.5 A |
| 1 A | |
| Continuous load current | ≤ 1 A |
Phoenix QUINT-PS/1AC/48DC/20-Power 2866695
Created on：2025-02-21 14:44
