Phoenix HC-B 24-A-UT-PER-M-terminal connector 1648108,HEAVYCON terminal connector pin ferrule, B24 series, 24-core, left ground protection wire connection and right side connection of control cabinet, screw connection.
| Product Type | Terminal Adapter |
| Product Series | HC-B |
| Series | HC-B |
| type | B24 |
| Bits | 24 |
| Connection Chart | 24 PE |
| contact coding | 1 - 24 |
| Model | for the right side of the control cabinet |
| screwdriver blade | 0.5 x 3.5mm |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 3 |
| Rated voltage (III/3) | 500V |
| Rated overvoltage | 6 kV |
| Rated current | 16 A |
| SCCR | 5 kA (UL 2237) |
| connection technology | |
| connection system | screw connection |
| connection meets standards | IEC / EN |
| Wire Connection | |
| Wire Cross Section | 0.5 mm² ... 2.5 mm² |
| Connectable Wire Cross Section AWG | 20 ... 14 |
| Tightening torque | 0.5 Nm ... 0.8 Nm |
| the stripping length of a single wire | 12mm |
| Dimensional drawing | |
| width | 34mm |
| height | 71.6mm |
| length | 111mm |
| drilling distance, horizontal | 104mm |
| drilling distance, vertical | 27mm |
| flame retardant rating to UL 94 | V0 |
| Contact Material | copper alloy |
| Material Contact Surface | Ag |
| Contact Carrier Material | PA |
| Standards/Regulations | PA: Railway vehicle fire protection-complete set of R22, R23 and R24 according to DIN EN 45545-2 (risk layer HL1-HL3) is required |
| Stripping Length of a Single Wire | 12mm |
| Mechanical parameters | |
| Insertion/unplugging cycle | ≥ 500 |
| environmental conditions | |
| ambient temperature (operation) | -40°C ... 125°C |
| Structure and Test Provisions | DIN EN 61984 |
| DIN EN 60664 | |
| IEC 60352 | |
| test | DIN EN 61984 |
| DIN EN 60664 | |
| IEC 60352 |
Phoenix HC-B 24-A-UT-PER-M-Terminal Type Connector 1648108
Created on：2025-02-25 14:12
