Phoenix SACC-M12FS-4CON-PG 7-SH-connector 1694295, connector, universal, 4-position, shielded, hole type straight head M12, code: A, screw connection, coil material: nickel-plated copper, cable seal Pg7, cable outer diameter 4mm ... 6mm
| Product Type |
Circular connector (cable side) |
| Sensor Type |
General |
| Bits |
4 |
| Outlet No. |
1 |
| Shielding |
have |
| coding |
A |
| cable outlet |
straight head |
| Pg screw connection |
Pg7 |
| insulation characteristics |
| Overvoltage Category |
II |
| pollution level |
3 |
| Dimensional drawing |
|
| width |
20mm |
| height |
20mm |
| Length |
57mm |
| External dimensions |
| outside diameter |
4mm ... 6mm |
| shell |
| diameter shell |
20mm |
| flame retardant rating, according to UL 94 |
HB |
| sealing material |
NBR |
| Fixture body material |
Brass, Nickel Plated |
| Contact Material |
CuZn |
| Material Contact Surface |
Au |
| Contact Carrier Material |
PA |
| screw connection material |
nickel-plated copper |
| Wire Connection |
| Connection Mode |
screw connection |
| Wiring cross section |
0.25 mm² ... 0.75 mm² (without cold head) |
| 0.14 mm² ... 0.5 mm² (with cold press head) |
| 0.25 mm² ... 0.75 mm² (rigid) |
| Connectable Wire Cross Section AWG |
24 ... 18 (without cold head) |
| 26 ... 20 (with cold pressing head) |
| the stripping length of a single wire |
5mm |
| Tightening torque |
0.4 Nm (M12 coil) |
| 0.2 Nm (screw terminal block) |
| 0.8 Nm ... 1 Nm (gland nut with connecting sleeve) |
| Rated overvoltage |
2.5 kV |
| contact resistance |
≤ 3 mΩ |
| insulation resistance |
≥ 100 MΩ |
| Rated voltage UN |
48V AC |
| 60V DC |
| Rated current IN |
4 A |
| Mechanical parameters |
| Insertion/unplugging cycle |
≥ 100 |
| connection 1 |
| Socket Design |
hole type |
| socket |
straight head |
| socket thread type |
M12 |
| coding |
A |
