Phoenix HC-B10-I-PT-F-ferrule 1407729, ferrule, number of bits: 10 PE, size: B10, number of wires per bit: 1, hole plug, in-line connection, 500V,16 A, 0.14 mm2 ... 2.5 mm2, application: power supply
Overview
Use only flexible leads with cold press head
Overview
The connector can only be plugged and unplugged when there is no load/voltage.
Assembly Instructions
To ensure proper use, it must be installed in an enclosure with at least IP54 protection
Product Type
ferrule with fixed number of cores
Series
HC-B
Application
power supply
type
B10
Bits
10
Connection Chart
10 PE
contact coding
1 - 10
Number of connections per bit
1
Contact Type
Stamping
insulation characteristics
Overvoltage Category
III
pollution level
3
Dimensional drawing
width
34mm
height
37mm
length
64mm
drilling distance, horizontal
57mm
drilling distance, vertical
27mm
mechanical characteristics
Contact diameter
2.5mm
connection technology
connection system
in-line connection
Number of connections per bit
1
connection meets standards
IEC / EN
Wire Connection
Wire Cross Section
0.14 mm² ... 2.5 mm²
Connectable Wire Cross Section AWG
26 ... 14
Tightening torque
0.8 Nm ... 1.2 Nm (PE connection)
0.5 Nm ... 0.8 Nm (mounting screws for mounting in HEAVYCON housing)
stripping length
8mm ... 10mm
Rated voltage (III/3)
500V
Rated overvoltage
6 kV
Rated current
16 A (power supply pin position)
SCCR
5 kA (UL 2237)
Mechanical parameters
Insertion/unplugging cycle
≥ 500
flame retardant rating, according to UL 94
V0
Contact Material
copper alloy
Material Contact Surface
Ag/Sn (anti-pollution protection)
Contact Carrier Material
PC
Standards/Regulations
PC: Railway vehicle fire protection-complete set of R22, R23 and R24 required according to DIN EN 45545-2 (risk layer HL1-HL3)
