Phoenix UM 25-D 9SUB/B/FRONT/Q-terminal module 2959560,VARIOFACE ultra-thin module, with screw wiring and D-SUB hole connector, can be installed vertically on NS 35/7.5 rail, 9 positions
| Product Type | Interface Module |
| Bits | 9 |
| insulation characteristics: electrical clearance and creepage distance | |
| insulation | Functional insulation |
| Overvoltage Category | II |
| pollution level | 2 |
| Nominal operating voltage (AC) | ≤ 30V AC |
| Nominal operating voltage (DC) | ≤ 60V DC |
| current (per branch) | ≤ 2.5 A |
| current (total current) | ≤ 22.5 A |
| electrical clearance and creepage distance | |
| Rated insulation voltage | 125V |
| Rated overvoltage | 1.2 kV (1.2 / 50 μs) |
| Interface 1 (Control Layer) | |
| connection meets standards | IEC 60807-2 |
| Connection Mode | D-SUB hole socket board |
| thread | UNC 4-40 |
| connection quantity | 1 |
| Bits | 9 |
| Insertion/unplugging cycle | > 500 |
| needle pitch | 2.74mm |
| interface 2 (field side) | |
| Connection Mode | screw connection |
| stripping length | 9mm |
| thread | M3 |
| Bits | 10 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| rigid wire cross section (2 wires with the same cross section) | 0.2 mm² ... 0.75 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| 0.25 mm² ... 1.5 mm² (cold press head without plastic sleeve) | |
| 0.25 mm² ... 1.5 mm² (cold press head with plastic sleeve) | |
| flexible wire cross section (2 wires with the same cross section) | 0.2 mm² ... 0.75 mm² |
| 0.25 mm² ... 0.34 mm² (cold press head without plastic sleeve) | |
| Attachable Guide Cross Section AWG | 24 ... 14 |
| Tightening torque | 0.4 Nm ... 0.5 Nm |
| needle pitch | 5mm |
| Status Display | No |
Phoenix UM 25-D 9SUB/B/FRONT/Q-Terminal block 2959560
Created on：2025-02-26 14:33
