Phoenix UT 2,5-PE-ground terminal 3044092, ground terminal, connection quantity: 2, connection mode: screw connection, rated connection capacity: 2.5 mm2, cross section: 0.14 mm2 -4mm2, installation mode: NS 35/7,5, NS 35/15, color: yellow and green
| Product Type |
Ground terminal |
| Application areas |
Railway Industry |
| Mechanical Engineering |
| Plant Engineering |
| Process Industry |
| connection quantity |
2 |
| Rows |
1 |
| insulation characteristics |
| Overvoltage Category |
III |
| pollution level |
3 |
| Rated surge voltage |
8 kV |
| rated conditions |
0.77W |
| the number of connections per layer |
2 |
| Rated cross section |
2.5 mm² |
| Rated wiring capacity AWG |
12 |
| thread |
M3 |
| Considerations |
Note the ampacity of the DIN rail. |
| Tightening torque |
0.5 ... 0.6 Nm |
| stripping length |
9mm |
| plug gauge |
A3 |
| connection meets standards |
IEC 60947-7-2 |
| Rigid conductor cross section |
0.14 mm² ... 4 mm² |
| cross-section AWG |
26 ... 12 (as amended by IEC standards) |
| Flexible Wire Cross Section |
0.14 mm² ... 4 mm² |
| WIRE CROSS SECTION, FLEXIBLE [AWG] |
26 ... 12 (as amended by IEC standards) |
| Flexible conductor cross-section (sleeve without plastic insulation) |
0.14 mm² ... 2.5 mm² |
| flexible conductor cross-section (sleeve with plastic insulating tube) |
0.14 mm² ... 2.5 mm² |
| Considerations |
Note: Product release, wiring capacity, and notes on aluminum wire connections can be found in the download area. |
| Rated cross section |
2.5 mm² |
| rated parameters (ATEX/IECEx) |
| identification |
II 2 GD Ex eb IIC Gb |
| Operating temperature range |
-60°C ... 110°C |
| Ex Certified Accessories |
3047028 D-UT 2,5/10 |
| 1205053 SZS 0,6X3,5 |
| 3022276 CLIPFIX 35-5 |
| 3022218 CLIPFIX 35 |
| Output |
(Permanent) |
| Ex Connection Data Overview |
| Torque range |
0.5 Nm ... 0.6 Nm |
| Rated cross section |
2.5 mm² |
| Rated wiring capacity AWG |
14 |
| Rigid Wiring Capacity |
0.14 mm² ... 4 mm² |
| Wiring capacity AWG |
26 ... 12 |
| flexible wiring capacity |
0.14 mm² ... 2.5 mm² |
| Wiring capacity AWG |
26 ... 14 |
| width |
5.2mm |
| End plate width |
2.2mm |
| height |
47.7mm |
| depth |
46.9mm |
| NS 35/7,5 depth |
47.5mm |
| NS 35/15 Depth |
55mm |
| color |
green and yellow |
| flame retardant rating to UL 94 |
V0 |
| Insulation Material Group |
I |
| insulation material |
PA |
| Application of Static Insulation Materials at Low Temperature |
-60°C |
| insulating materials (DIN EN 60216-1(VDE 0304-21)) |
130°C |
| Insulation Relative Temperature Index (Electrical, UL 746 B) |
130°C |
| railway vehicles (DIN EN 45545-2) R22 |
HL 1 - HL 3 |
| Fire protection of railway vehicles (DIN EN 45545-2) R23 |
HL 1 - HL 3 |
| railway vehicles (DIN EN 45545-2) R24 |
HL 1 - HL 3 |
| Fire protection of railway vehicles (DIN EN 45545-2) R26 |
HL 1 - HL 3 |
| Thermal Release NFPA 130 (ASTM E 1354) |
28 MJ/kg |
