Phoenix SACC-M12MS-5CON-PG 9-VA-connector 1553190, connector, universal, 5-position, plug straight head M12, code: A, screw connection, coil material: stainless steel 1.4404, cable seal Pg9, cable outer diameter 6mm ... 8mm
| Product Type | Circular connector (cable side) |
| Sensor Type | General |
| Bits | 5 |
| Outlet No. | 1 |
| Shielding | None |
| coding | A |
| cable outlet | straight head |
| Pg screw connection | Pg9 |
| insulation characteristics | |
| Overvoltage Category | II |
| pollution level | 3 |
| Dimensional drawing | |
| Length | 60mm |
| External dimensions | |
| outside diameter | 6mm ... 8mm |
| shell | |
| diameter shell | 20mm |
| sealing material | NBR |
| Fixture body material | PA |
| Contact Material | CuZn |
| Material Contact Surface | Au |
| Contact Carrier Material | PA |
| screw connection material | stainless steel 1.4404 |
| Wire Connection | |
| Connection Mode | screw connection |
| Wiring cross section | 0.25 mm² ... 0.75 mm² (without cold head) |
| 0.14 mm² ... 0.75 mm² (with cold press head) | |
| 0.25 mm² ... 0.75 mm² (rigid) | |
| Connectable Wire Cross Section AWG | 24 ... 18 (without cold head) |
| 26 ... 20 (with cold pressing head) | |
| the stripping length of a single wire | 5mm |
| Tightening torque | 0.8 Nm ... 1 Nm (fastening nut) |
| 0.2 Nm (screw terminal block) | |
| 0.4 Nm (M12 coil) | |
| Rated overvoltage | 1.5 kV |
| contact resistance | ≤ 3 mΩ |
| insulation resistance | ≥ 100 MΩ |
| Rated voltage UN | 48V AC |
| 60V DC | |
| Rated current IN | 4 A |
| Mechanical parameters | |
| Insertion/unplugging cycle | ≥ 100 |
| connection 1 | |
| Socket Design | PLUG |
| socket | straight head |
| socket thread type | M12 |
| coding | A |
| Signal Type/Classification | General |
| Stripping Length of a Single Wire | 5mm |
Phoenix SACC-M12MS-5CON-PG 9-VA-Connector 1553190
Created on：2025-03-04 16:06
