Phoenix RIF-0-OPT-24DC/230AC/1-solid state relay module 2905295, pre-installed solid state relay module with plug-in connection, including: relay base (with pop-up device) and plug-in micro solid state relay. Input voltage: 24V DC. Output: 24 - 253V AC/0.75 A
| Product Type | Solid State Relay Module |
| product series | RIFLINE complete |
| Application | General |
| Mode of operation | 100% operating factor |
| insulation characteristics: electrical clearance and creepage distance between power supply circuits | |
| insulation | Foundation Isolation |
| Overvoltage Category | III |
| pollution level | 2 |
| Data Management Status | |
| Last data maintenance date | 20.03.2025 |
| rated conditions | 0.19W |
| test voltage (input/output) | 2.5 kVrms(50Hz,1 minute, input/output) |
| Electrical clearance and creepage distance between power supply circuits | |
| Rated insulation voltage | 250V AC |
| Rated overvoltage | 4 kV |
| Rated operating voltage UC | 24V DC |
| UC | 0.8 ... 1.2 |
| Rated operating current IC | 8 mA |
| Input Voltage Range | 19.2V DC ... 28.8V DC |
| switch threshold "0" signal, reference Uc | < 0.4 |
| switch threshold "1" signal, reference Uc | > 0.8 |
| Typical Response Time | 10 ms |
| Typical closing time | 10 ms |
| Status Display | LED (yellow) |
| protection circuit | Standby diode |
| sending frequency | 10Hz |
| Contact Type | 1 N/O contact |
| Digital Output Design | electronic |
| Output Voltage Range | 24V AC ... 253V AC (50/60 Hz) |
| limit continuous current | 750 mA (see Temperature Load Curve) |
| Maximum impact current | 30 A (10 ms) |
| Minimum Load Current | 10 mA |
| leakage current | 1 mA (in disconnected state) |
| surge current | 30 A AC (tp = 20 ms at 25°C) |
| minimum phase angle cos phi | 0.5 |
| Maximum load value | 4.5 A2s (tp = 10 ms at 25°C) |
| overvoltage protection | > 275V |
| Voltage drop at maximum limited continuous current | < 1V |
| output circuit | Two-wire, zero-voltage switching |
| protection circuit | RCV circuit |
| Use Class CB Scheme (IEC 60947-5-1) | AC12, 0.75 A/250 V |
| Connection Mode | in-line connection |
| stripping length | 8mm |
| Rigid conductor cross section | 0.14 mm² ... 1.5 mm² |
| Flexible Wire Cross Section | 0.14 mm² ... 1.5 mm² |
| 0.14 mm² ... 1.5 mm² (cold press head with plastic sleeve) | |
| Connectable Guide Cross Section AWG | 24 ... 16 |
| Product Size | |
| width | 6.2mm |
| height | 93mm |
| depth | 66mm |
| color | gray (RAL 7042) |
| flame retardant rating, according to UL 94 | V2 (Enclosure) |
| environmental conditions | |
| protection level | IP20 |
| ambient temperature (operation) | -25°C ... 60°C |
| ambient temperature (storage/transport) | -40°C ... 85°C |
Phoenix RIF-0-OPT-24DC/230AC/1-Solid State Relay Module 2905295
Created on：2025-06-30 09:00
