Phoenix RIF-0-RPT-12DC/21AU-Relay Module 2903369, a prefabricated relay module with in-line connection, including: a relay base with a pop-up device and a multi-layer gold-plated contact relay. Contact switching type: 1 changeover contact. Input voltage: 12V DC
Product Type
Relay Module
product series
RIFLINE complete
Application
General
Mode of operation
100% operating factor
mechanical life
about 2x 107times
insulation characteristics
insulation
security isolation
Overvoltage Category
III
pollution level
2
Data Management Status
Last data maintenance date
20.03.2025
service life, electrical
See Graph
rated conditions
0.19W
test voltage (coil/contact)
4 kVrms(50Hz,1 min, coil/contact)
Rated insulation voltage
250V AC
Rated overvoltage
6 kV
coil side
Rated input voltage UN
12V DC
Input Voltage Range
9.6V DC ... 18V DC (20 °C)
to UNas reference
See Graph
drives and functions
monostable
drive (polarity)
polarization
UN
16 mA
Typical Response Time
5 ms
Typical release time
8 ms
coil voltage
12V DC
protection circuit
freewheeling diode
Operating voltage display
yellow LED
switching
Contact Type
1 changeover contact
Switch Contact Type
single contact
Contact Material
AgSnO, hard gold plating
maximum switching voltage
30V AC
36V DC
Minimum Switching Voltage
100 mV (10 mA)
limit continuous current
50 mA
Maximum impact current
50 mA
minimum switching current
1 mA (12 V)
Maximum power rating (resistive load)
1.2W (24V DC)
Use Class CB Scheme (IEC 60947-5-1)
AC15, 3 A/250V (N/O contact)
AC15, 1 A/250V (normally closed contact)
DC13, 1.5 A/24V (N/O contact)
DC13, 0.2 A/110V (N/O contact)
DC13, 0.1 A/220V (N/O contact)
switching: when the gold plating layer is destroyed
Considerations
If the gold plating is damaged, the following values are applicable.
