Phoenix RIF-1-RPT-LDP-24DC/2X21/FG-Relay Module 2908215, prefabricated relay module with plug-in interface, including: relay base, safety relay with forced guide contact (in accordance with DIN EN 61810-3 standard), plug-in display/Interference suppression module and bracket, contact type: 2 switching contacts, input voltage: 24V DC
| Product Type |
Relay Module |
| product series |
RIFLINE complete |
| Application |
forced guide contact |
| Mode of operation |
100% operating factor |
| mechanical life |
about 107Switch Times |
| B10d |
600000 weeks (AC1; 250V / 6 A; 1 NO) |
| 900000 weeks (AC1; 250V / 3 A; 1 NO) |
| 1800000 weeks (AC1; 250V / 1,5 A; 1 NO) |
| 300000 weeks (DC13; 24V / 3 A; 1 NO) |
| 1000000 weeks (DC13; 24V / 1,5 A; 1 NO) |
| 3000000 weeks (DC13; 24V / 0,75 A; 1 NO) |
| insulation characteristics: electrical clearance and creepage distance between power supply circuits |
| insulation |
input and output |
| changeover contacts |
| Overvoltage Category |
III |
| pollution level |
2 |
| Data Management Status |
| Last data maintenance date |
26.03.2025 |
| rated conditions |
0.72W |
| test voltage (coil/contact) |
4 kVrms(50 Hz, 60 s) |
| test voltage (open contact) |
1.5 kVrms(50 Hz, 60 s) |
| test voltage (changeover contact/changeover contact) |
2.5 kVrms(50 Hz, 60 s) |
| Electrical clearance and creepage distance between power supply circuits |
| Rated insulation voltage |
250V AC (input/output) |
| Rated overvoltage |
6 kV (input/output) |
| 4 kV (between changeover contacts) |
| Short circuit protection device |
| current |
10 A (RT28-32) |
| voltage |
500V (SCPD) |
| short-circuit current |
1 kA (condition short-circuit current) |
| coil side |
| Nominal operating voltage UN |
24V DC |
| Input Voltage Range |
20.4V DC ... 28.8V DC (20 °C) |
| to UNas reference |
See Graph |
| drives and functions |
monostable |
| drive (polarity) |
polarization |
| UN |
30 mA |
| Typical Response Time |
15 ms |
| Typical release time |
10 ms |
| coil voltage |
24V DC |
| protection circuit |
freewheeling diode |
| Operating voltage display |
yellow LED |
| switching |
| Contact Type |
2 changeover contacts, forced actuation |
| Switch Contact Type |
Single contact |
| Contact Material |
AgSnO |
| maximum switching voltage |
250V AC/DC |
| limit continuous current |
6 A |
| Maximum power rating (resistive load) |
144W (24V DC) |
| 58W (48V DC) |
| 54W (60V DC) |
| 55W (110V DC) |
| 55W (220V DC) |
| 1500 VA (250V AC) |
| Use Class CB Scheme (IEC 60947-5-1) |
AC15, 3 A/240V (N/O contact) |
| Connection Mode |
in-line connection |
| stripping length |
8mm |
| Rigid conductor cross section |
0.14 mm² ... 1.5 mm² |
| Flexible Wire Cross Section |
0.14 mm² ... 1.5 mm² |
| 0.14 mm² ... 1.5 mm² (cold press head with plastic sleeve) |
| 0.14 mm² ... 1 mm² (sleeve with plastic insulating sleeve, two wires on the two-position terminal) |
| Attachable Guide Cross Section AWG |
26 ... 16 |
