Phoenix RIF-RPT-LDP-24DC/1X2/3X1/AU/FG-relay module 1148703, relay module with plug-in connection, including: relay base and status LED, freewheeling diode and fixing clip, safety relay with mechanical interlocking contact (in accordance with DIN EN 61810-3 standard), contact type: 3 normally open contacts and 1 normally closed contact, input voltage: 24V DC
Product Type
Relay Module
Product Series
RIFLINE complete
Application
forced guide contact
Mode of operation
100% operating factor
mechanical life
about 107Switch Times
B10d
810000 weeks (AC 15,250V / 0.5 A,1 NO)
170000 weeks (AC15; 250V / 2 A; 1 NO)
318000 weeks (DC13,24V / 1 A,1 NO)
208000 weeks (DC13,24V / 2 A,1 NO)
insulation characteristics: electrical clearance and creepage distance between power supply circuits
insulation
Foundation Isolation
Safety isolation, reinforced insulation and 6 KV between coil and contact circuit and between contacts 11-12 and 13-14, 41-42 to 23-24, 33-34
Overvoltage Category
III
pollution level
2
Data Management Status
Last data maintenance date
28.04.2025
rated conditions
0.41W
test voltage (coil/contact)
4 kVrms(50Hz,1 min, coil/contact)
test voltage (open contact)
1.5 kVrms(50Hz,1 minute, open contacts)
test voltage ()
2.5 kVrms(50Hz,1 minute, center contact: 7, 8 to 9, 10)
test voltage ()
4 kVrms(50Hz,1 minute, middle contact: all other contacts)
Electrical clearance and creepage distance between power supply circuits
Rated insulation voltage
250V AC (input/output)
Rated overvoltage
6 kV (input/output)
Short circuit protection device
current
10 A (RT28-32)
voltage
500V (SCPD)
short-circuit current
1 kA (condition short-circuit current)
coil side
Nominal operating voltage UN
24V DC
to UNas reference
See Attenuation Curve
drives and functions
monostable
drive (polarity)
polarization
UN
17 mA
UNinput power consumption
0.4W
Typical Response Time
10 ms
Typical release time
15 ms
coil voltage
24V DC
protection circuit
freewheeling diode
Status Display
LED (yellow)
switching
Contact Type
3 normally open contacts, 1 normally closed contact
Switch Contact Type
single contact
Contact Material
AgSnO, hard gold plating
maximum switching voltage
250V AC
300V DC
Minimum Switching Voltage
10V (5 mA)
limit continuous current
6 A
Maximum impact current
35 A (20 ms)
minimum switching current
5 mA (10 V)
Maximum power rating (resistive load)
144W (24V DC)
100W (48V DC)
75W (60V DC)
55W (110V DC)
50W (220V DC)
1500 VA (250V AC)
mechanical interlocking contacts according to EN 61810-3
