Phoenix ST-OE3- 60DC/ 48DC/100-solid state relay 2911045, plug-in input solid state relay, with LED and protection circuit in input and output circuits, input: 48 - 60V DC, output: 8 - 48V DC/maximum 100 mA, can be inserted into the base terminal
| Rated input voltage UN | 60V DC |
| relative to UNinput voltage range | 0.72 ... 1.1 |
| Input Voltage Range | 43.2V DC ... 66V DC |
| switch threshold "0" signal, reference UN | ≤ 0.4 |
| switch threshold "1" signal, reference UN | ≥ 0.8 |
| UN | 9 mA |
| Typical Response Time | 50 µs |
| Typical closing time | 100 µs |
| Status Display | LED (yellow) |
| protection circuit | polarity protection; polarity protection diode |
| Surge Protection | |
| sending frequency | 300Hz |
| Digital Output Design | electronic |
| Output Voltage Range | 8V DC ... 48V DC |
| limit continuous current | 100 mA |
| Voltage drop at maximum limited continuous current | 1.2V |
| output circuit | 2 lines, floating ground; 3 lines, reference ground |
| protection circuit | polarity protection; polarity protection diode |
| dry running; freewheeling diode | |
| output resistance | approx. 22 kΩ (3-wire connection) |
| width | 20.8mm |
| height | 33mm |
| depth | 66.5mm |
| color | Green (RAL 6021) |
| environmental conditions | |
| ambient temperature (operation) | -20°C ... 60°C |
| ambient temperature (storage/transport) | -20°C ... 70°C |
| Standards/Regulations | IEC 60664 |
| IEC 60664A | |
| DIN VDE 0110 |
| Installation position | arbitrary |
Phoenix ST-OE3- 60DC/ 48DC/100-Solid State Relay 2911045
Created on：2025-07-03 08:55
