Phoenix ST-OV3- 24DC/ 24DC/2-solid state relay 2905190, plug-in high-power solid state relay, with LED and protection circuit in input and output circuits, input: 24V DC, output: short circuit protection, 10 - 30V DC/max. 2 A, can be inserted into the base terminal
| test voltage (input/output) | 2.5 kV AC (input/output) |
| Rated input voltage UN | 24V DC |
| relative to UNinput voltage range | 0.8 ... 1.2 |
| Input Voltage Range | 19.2V DC ... 28.8V DC |
| switch threshold "0" signal, voltage | ≤ 6.9V |
| switch threshold "1" signal voltage | ≥ 8.5V |
| UN | 5 mA |
| Typical Response Time | 17 µs |
| Typical closing time | 104 µs |
| Status Display | LED (yellow) |
| protection circuit | polarity protection; polarity protection diode |
| surge protection | |
| sending frequency | 1000Hz |
| Digital Output Design | electronic |
| Output Voltage Range | 10V DC ... 30V DC |
| limit continuous current | 2 A (see Temperature Load Curve) |
| peak quiescent voltage | 35V DC (collector-emitter reverse voltage) |
| Voltage drop at maximum limited continuous current | 1.5V |
| output circuit | 3-wire connection, reference ground |
| Status Display | LED (red) |
| protection circuit | polarity protection; polarity protection diode |
| dry running; freewheeling diode |
| width | 20.8mm |
| height | 33mm |
| depth | 66.5mm |
| color | Green (RAL 6021) |
| environmental conditions | |
| Ambient temperature (operation) | -20°C ... 60°C |
| ambient temperature (storage/transport) | -20°C ... 70°C |
| Standards/Regulations | DIN VDE 0110 |
| Installation position | arbitrary |
Phoenix ST-OV3- 24DC/ 24DC/2-Solid State Relay 2905190
Created on：2025-07-03 09:12
