Phoenix CAPAROC PM S-R-power module 1115661, power module with status output and reset input, used to supply 12V DC or 24V DC to the CAPAROC equipment circuit breaker system. Suitable for DIN rail mounting via CAPAROC bus bars.
| Product Type | Equipment circuit breaker |
| Product Series | CAPAROC |
| type | Plug-in Modules |
| slots | 2 |
| insulation characteristics | |
| protection level | III |
| pollution level | 2 |
| Overview | |
| working voltage | 10V DC ... 30V DC |
| Rated voltage | 12V DC |
| 24V DC | |
| Nominal operating current IN | 45 A DC (total current inlet) |
| Rated overvoltage | 0.5 kV |
| Breaking method | E (Electronic) |
| dielectric strength | 35V DC (load circuit) |
| efficiency | > 99% |
| closed-circuit current I0 | Typical 9 mA (no load at 24V) |
| power consumption | Typical 0.22W (no load at 24V) |
| < 1.5W (in normal operation at 24V and 45 A) | |
| temperature attenuation | 45 A (total current at 40°C) |
| 30 A (total current at 65°C) | |
| MTBF (IEC 61709, SN 29500) | 18886912.65 h (25°C, 21% load) |
| 5907048.64 h (40°C at 34.25% load) | |
| 933563.97 h (at 40°C, 100% load) | |
| voltage drop | 0.03V (at 45 A) |
| Load Circuit | |
| undervoltage shutdown | ≤ 9.2V DC (active) |
| ≥ 10.2V DC (passive) | |
| Overvoltage shutdown | ≥ 30.5V DC (active) |
| ≤ 29.5V DC (passive) | |
| Reset | |
| Input Voltage Range | 7V DC ... 30V DC (using falling edge reset) |
| power consumption | Typical 0.5 mA (24V DC) |
| pulse length | ≥ 50 ms |
| stripping length | 8mm |
| Rigid conductor cross section | 0.2 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 16 |
| Flexible conductor cross-section, with sleeve, with plastic insulation sleeve | 0.2 mm² ... 0.75 mm² |
| flexible conductor cross-section with cold press head without insulation sleeve | 0.2 mm² ... 1.5 mm² |
| Status Output | |
| output voltage | maximum 30V DC (no fault, input voltage ± 5%) |
| 0V DC (error) | |
| output current | max. 20 mA |
| stripping length | 8mm |
| Rigid conductor cross section | 0.2 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 16 |
| Flexible conductor cross-section, with sleeve, with plastic insulation sleeve | 0.2 mm² ... 0.75 mm² |
| flexible conductor cross-section with cold press head without insulation sleeve | 0.2 mm² ... 1.5 mm² |
| Status Output | |
| output voltage | Maximum 30V DC (at least one channel input voltage ± 5% when I > 80%) |
| output current | max. 20 mA |
| stripping length | 8mm |
| Rigid conductor cross section | 0.2 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 16 |
| Flexible conductor cross-section, with sleeve, with plastic insulation sleeve | 0.2 mm² ... 0.75 mm² |
| flexible conductor cross-section with cold press head without insulation sleeve | 0.2 mm² ... 1.5 mm² |
Phoenix CAPAROC PM S-R-Power Module 1115661
Created on：2025-07-14 09:15
