Phoenix EMG 17-REL/SG-B 24/21/M-Relay module 2952910, relay module, with welded remanence micro switch relay, with negative switching diode wiring, contact (AgSnO): small to large Load, 1 PDT,24V DC input voltage
| Product Type | Relay Module |
| product series | EMG |
| Application | General |
| Mode of operation | 100% operating factor |
| mechanical life | about 107Switch Times |
| insulation characteristics: electrical clearance and creepage distance between power supply circuits | |
| insulation | safety isolation, reinforced insulation |
| Overvoltage Category | III |
| pollution level | 2 |
| Data Management Status | |
| Last data maintenance date | 02.06.2025 |
| rated conditions | 0.19W |
| test voltage (coil/contact) | 4 kVrms(50Hz,1 min, coil/contact) |
| Electrical clearance and creepage distance between power supply circuits | |
| Rated insulation voltage | 250V AC |
| Rated overvoltage | 4 kV |
| coil side | |
| Rated input voltage UN | 24V DC |
| Input Voltage Range | 19.2V DC ... 26.4V DC (20 °C) |
| drives and functions | bistability |
| drive (polarity) | polarization |
| UN | Typical 8 mA |
| Typical Response Time | 5 ms |
| Typical release time | 5 ms |
| Pulse Time Range | 30 ms ... 5 s |
| coil voltage | 24V DC |
| protection circuit | backup diode; freewheeling diode |
| polarity protection; polarity protection diode | |
| switching | |
| Contact Type | 1 changeover contact |
| Switch Contact Type | single contact |
| Contact Material | AgSnO |
| maximum switching voltage | 250V AC/DC |
| Minimum Switching Voltage | 5V (at 100 mA) |
| 24V (1 mA) | |
| limit continuous current | 6 A |
| Maximum impact current | 8 A |
| minimum switching current | 1 mA (24 V) |
| 100 mA (5 V) | |
| Maximum power rating (resistive load) | 144W (24V DC) |
| 43W (available for 48V DC) | |
| 42W (available for 60V DC) | |
| 55W (available for 110V DC) | |
| 100W (available for 220V DC) | |
| 1500 VA (available for 250V AC) | |
| switching: when the gold plating layer is destroyed | |
| maximum switching voltage | 250V AC/DC |
| limit continuous current | 5 A |
| Maximum impact current | 6 A |
| Maximum power rating (resistive load) | 120W (24V DC) |
| 40W (available for 48V DC) | |
| 35W (available for 60V DC) | |
| 30W (available for 110V DC) | |
| 55W (available for 220V DC) | |
| 1250 VA (available for 250V AC) | |
| coil side | |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 4 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 12 |
| contact side | |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 4 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 12 |
Phoenix EMG 17-REL/SG-B 24/21/M-Relay Module 2952910
Created on：2025-07-14 10:21
