Phoenix EMG 30-SPK-10K LIN-fixed value encoder 2942137, cascaded set value potentiometer, selectable preset set point through 24V control signal, resistance 10kΩ
| Product Type | constant potentiometer |
| Test Voltage Relay Coil/Relay Contact | 1 kV AC |
| coil side | |
| Rated input voltage UN | 24V ± 25% |
| Typical Response Time | < 10 ms |
| Typical release time | < 10 ms |
| protection circuit | damping diode, polarity protection diode |
| Operating voltage display | is |
| potentiometer | |
| potentiometer, resistance value | 10 kΩ ±20% |
| linear | 5% (of terminal value) |
| potentiometer, current carrying capacity | 0.5W |
| Toggle: | |
| Contact Material | fixed contact: silver palladium (AgPdAu),3 & micro;m hard gold plating |
| moving contact: silver palladium (AgPd) | |
| maximum switching voltage | 10V (depending on application) |
| mechanical life | > 2x 107Switch Times |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 4 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 12 |
| Dimensional drawing | |
| width | 30mm |
| height | 75mm |
| depth | 68mm |
| color | green (RAL 6021) |
| Shell Material | Polycarbonate fiber reinforced PC-F |
| environmental conditions | |
| Ambient temperature (operation) | 0°C ... 40°C |
| Installation Type | DIN rail mounting |
| Installation position | arbitrary |
Phoenix EMG 30-SPK-10K LIN-fixed value encoder 2942137
Created on：2025-07-18 09:16
