Phoenix PT-IQ-3-HF-12DC-PT-surge protector 2801288, surge protection device, composed of protective plugs and basic components, the module has built-in multi-level status indicators, which can be used for three signal lines with a common reference potential. Suitable for high-frequency applications and telecommunications interfaces without supply voltage (maximum rate 90 Mbps). Can be used in safety-related circuits up to SIL 3.

Product Type Information Technology
product series PLUGTRAB IQ
IEC Category C1
C2
C3
D1
type DIN rail module, split, detachable
Surge protection fault alarm Vision, Multi-Stage
insulation characteristics
Overvoltage Category III
pollution level 2

Rated voltage UN 12V DC

Connection Mode in-line connection
Flexible Wire Cross Section 0.2 mm² ... 2.5 mm²
Rigid conductor cross section 0.2 mm² ... 4 mm²
Attachable Guide Cross Section AWG 24 ... 12

Dimensional drawing
width 17.7mm
height 109.3mm
depth 77.5mm (7.5mm with DIN rail)
Horizontal stitch pitch 1 Partition

color black (RAL 9005)
black (RAL 9005)
flame retardant rating to UL 94 V0
Shell Material PA 6.6

Mechanical parameters
Open Side Panel No

movement direction Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground
Maximum continuous operating voltage UC 15V DC
10V AC
Rated current 600 mA (40°C)
UC, the effective working current IC ≤ 100 & micro;A (per path)
Residual Flow IPE ≤ 100 & micro;A (per path)
Nominal discharge current In(8/20) & micro;s (core-core) 10 kA
Rated discharge current In(8/20)& micro;s (core-ground) 10 kA
pulse discharge current Iimp(350) & micro;s (core-ground) 2.5 kA
Total discharge current ITotal(8/20) µs 20 kA
voltage protection level Up(core-core) ≤ 90V (C1 - 1 kV / 500 A)
≤ 145V (C2 - 10 kV / 5 kA)
≤ 40V (C3 - 25 A)
≤ 40V (C3 - 50 A)
voltage protection level Up(line-ground) ≤ 90V (C1 - 1 kV / 500 A)
≤ 145V (C2 - 10 kV / 5 kA)
≤ 40V (C3 - 25 A)
≤ 40V (C3 - 50 A)

Phoenix PT-IQ-3-HF-12DC-PT-Surge Protector 2801288

Created on:2025-08-07 11:14

News Dynamics

NEWS