Phoenix FLT-SEC-P-T1-1S-350/25-FM-1 Class 2 combined surge protector 2905415, plug-in lightning protection surge protector without leakage current, meets the requirements of Class 1/Class I, used for single-phase power supply network, The neutral wire is separated from the protective ground (L1, PE, N).
| Product Type | combination type |
| product series | SEC Family |
| IEC Category | I / II |
| EN Type | T1 / T2 |
| IEC power supply system | TN-S |
| TT | |
| type | DIN rail module, split, detachable |
| Bits | 2 |
| Surge protection fault alarm | visual status indication window and remote alarm contact |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated frequency fN | 50Hz (60 Hz) |
| indicator/remote signaling | |
| Connection Name | Remote alarm contact |
| switching function | changeover contact |
| Nominal operating voltage | 12V AC ... 250V AC |
| 125V DC (200 mA DC) | |
| Operating current | 10 mA AC ... 1 A AC |
| 1 A DC (30V DC) | |
| Connection Mode | screw connection |
| thread | M5 |
| Tightening torque | 4.5 Nm |
| stripping length | 18mm |
| Flexible Wire Cross Section | 2.5 mm² ... 35 mm² |
| Rigid conductor cross section | 2.5 mm² ... 35 mm² |
| Attachable Guide Cross Section AWG | 13 ... 2 |
| Connection Mode | fork cable end |
| Flexible Wire Cross Section | 1.5 mm² ... 16 mm² |
| Remote alarm contact | |
| Connection Mode | COMBICON in-line/screw connection |
| thread | M2 |
| Tightening torque | 0.25 Nm |
| stripping length | 7mm |
| Flexible Wire Cross Section | 0.14 mm² ... 1.5 mm² |
| Rigid conductor cross section | 0.14 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG | 28 ... 16 |
| Dimensional drawing | |
| width | 71.2mm |
| height | 95.2mm |
| depth | 74.5mm |
| Horizontal stitch pitch | 4 Zoning |
| color (pin connector) | light gray (RAL 7035) |
| color (basic element) | gray (RAL 7042) |
| flame retardant rating to UL 94 | V-0 |
| material | 600 |
| insulation material | PA6.6-FR 20% GF |
| PBT-FR | |
| Material Group | I |
| Shell Material | PA 6.6-FR 20 % GF |
| PBT-FR |
| Mechanical parameters | |
| Open Side Panel | No |
| protection channel | L-N |
| L-PE | |
| N-PE | |
| movement direction | 1L-N & N-PE |
| Rated voltage UN | 240V AC (TN-S) |
| 240V AC (TT) | |
| Rated frequency fN | 50Hz (60 Hz) |
| Maximum continuous operating voltage UC | 350V AC |
| Rated load current IL | 125 A (< 55 °C) |
| Residual Flow IPE | ≤ 0.01 mA |
| Nominal discharge current In(8/20) µs (L-N) | 25 kA |
| Nominal discharge current In(8/20) µs (L-PE) | 25 kA |
| Nominal discharge current In(8/20) µs (N-PE) | 100 kA |
| Maximum discharge current Imax(8/20) µs (L-N) | 50 kA |
Phoenix FLT-SEC-P-T1-1S-350/25-FM - 1 Class 2 Combined Surge Protector 2905415
Created on：2025-08-08 09:28
