Phoenix VAL-SEC-T2-2 0-120DC-FM-2 surge protector 2907874, pluggable surge protector, conforms to Class 2/Class II, used for DC power supply with linear operation characteristics, with remote indication contacts.
| Product Type | surge protector |
| product series | SEC Family |
| IEC Category | II |
| T2 | |
| EN Type | T2 |
| IEC power supply system | DC |
| type | DIN rail module, split, detachable |
| Bits | 2 |
| Surge protection fault alarm | visual status indication window and remote alarm contact |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated voltage UN | 100V DC ... 120V DC |
| indicator/remote signaling | |
| Connection Name | Remote alarm contact |
| switching function | changeover contact |
| Nominal operating voltage | 5V AC ... 250V AC (altitude ≤ 2000 m (amsl)) |
| 5V AC ... 150V AC (altitude> 2000 m (amsl)) | |
| 125V DC (200 mA DC) | |
| Operating current | 5 mA AC ... 1 A AC |
| 1 A DC (30V DC) | |
| Connection Mode | screw connection |
| thread | M5 |
| Tightening torque | 4.5 Nm |
| stripping length | 16mm |
| Flexible Wire Cross Section | 2.5 mm² ... 16 mm² |
| Rigid conductor cross section | 2.5 mm² ... 25 mm² |
| Attachable Guide Cross Section AWG | 12 ... 4 |
| Connection Mode | fork cable end |
| Flexible Wire Cross Section | 1.5 mm² ... 6 mm² |
| Remote alarm contact | |
| Connection Mode | COMBICON in-line/screw connection |
| thread | M2 |
| Tightening torque | 0.25 Nm |
| stripping length | 7mm |
| Flexible Wire Cross Section | 0.14 mm² ... 1.5 mm² |
| Rigid conductor cross section | 0.14 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG | 28 ... 16 |
| Dimensional drawing | |
| width | 25.4mm |
| height | 97.9mm |
| depth | 74.5mm (7.5mm with DIN rail) |
| Horizontal stitch pitch | 1.4 Partition |
| color (pin connector) | light gray (RAL 7035) |
| color (basic element) | gray (RAL 7042) |
| flame retardant rating to UL 94 | V-0 |
| material | 600 |
| insulation material | PA6.6-FR 20% GF |
| PBT-FR | |
| Material Group | I |
| Shell Material | PA 6.6-FR 20 % GF |
| PBT-FR |
| protection channel | (DC+) - (DC-) |
| (DC+/DC-) - PE | |
| movement direction | (DC+/DC-) - PE |
| Rated voltage UN | 100V DC ... 120V DC |
| Maximum continuous operating voltage UC | 150V DC |
| Rated load current IL | 40 A (Biconnect M4 fork cable pin 6 mm²) |
| 63 A (TWIN cold press head 2 x 10 mm²) |
Phoenix VAL-SEC-T2-2 0-120DC-FM-2 class surge protector 2907874
Created on：2025-08-09 09:52
