Phoenix SUBCON-PLUS-PROFIB-D-SUB bus connector 2744348,D-SUB plug, 9-position, pin type, axial model with two 35 ° cable inlet, bus system: PROFIBUS DP, maximum transmission speed of 12 Mbps, can be switched by slide Switch terminal resistance, pin distribution: 3, 5, 6, 8; pull-back spring terminal
Product Type
Data plug
MTTF
6706 years (SN 29500 standard, temperature 25°C, duty cycle 21%)
1817 years (SN 29500 standard, temperature 40°C, duty cycle 34.25%)
155 years (SN 29500 standard, temperature 40°C, duty cycle 100%)
Pin Distribution
3, 5, 6, 8
rated conditions
0.025W
Rated voltage UN
5V
Rated current IN
100 mA
transmission medium
copper cable
D-SUB connection
Connection Mode
D-SUB connector
PCB Connection
Connection Mode
pull-back spring connection
stripping length
9mm
Minimum cross section of rigid conductor
0.12 mm²
Maximum cross section of rigid conductor
0.5 mm²
Single Wire/End Point, Minimum Rigid AWG
26
single wire/wiring point, maximum rigid AWG
20
bus system
PROFIBUS DP
signal
PROFIBUS
Dimensional drawing
width
16mm
height
49.5mm
Length
60mm
Identification Material (Shell)
ABS (metal plating)
Cable outer diameter
7.6mm... 8.4mm (bus line incoming)
Mechanical parameters
Insertion/unplugging cycle
> 200
meets EN 60068-2-6/IEC 60068-2-6 anti-vibration standards
vibration (running): 5g,10 ... 150Hz, 2.5 h, XYZ direction
Conforms to EN 60068-2-27/IEC 60068-2-27 impact resistance standards
impact force (operation): 15g,11 ms, half-sine shock pulse
environmental conditions
protection level
IP40
ambient temperature (operation)
-20°C ... 75°C
ambient temperature (storage/transport)
-25°C ... 80°C
elevation
≤ 5000 m (see manufacturer's statement for high altitude operation for limits)
Allowable humidity (operating)
10%... 95% (no condensation)
Permissible humidity (storage/transportation)
5%... 95% (non-condensing)
Phoenix SUBCON-PLUS-PROFIB-D-SUB Bus Connector 2744348
