Phoenix VAL-MS 60 ST-2 type surge protector 2807573, type 2 surge protection plug, using high-power varistor, matching with VAL-MS base, temperature monitoring, optical fault alarm. Working voltage: 60V AC

Product Type Spare Plug
Product Series VALVETRAB MS
IEC Category II
T2
EN Type T2
IEC power supply system TN
type needle type
Bits 1
Surge protection fault alarm with visual status indication window
can test protectors using the CHECKMASTER software tests:
insulation characteristics
Overvoltage Category III
pollution level 2

Rated frequency fN 50Hz (60 Hz)

Connection Mode pluggable

Dimensional drawing
width 17.5mm
height 52.4mm
depth 55.3mm
Horizontal stitch pitch 1 Partition

color black (RAL 9005)
flame retardant rating to UL 94 V-0
material 600
insulation material PA 6.6
Material Group I
Shell Material PA 6.6

protection channel L-PEN
movement direction 1L-N/PE
Rated voltage UN 60V AC (TN)
60V DC
-48V DC (RRH)
Rated frequency fN 50Hz (60 Hz)
Maximum continuous operating voltage UC 75V AC
100V DC
Residual Flow IPE ≤ 0.45 mA
Standby power consumption PC ≤ 35 mVA
Nominal discharge current In(8/20)µs 15 kA
Maximum discharge current Imax(8/20) µs 40 kA
Rated short-circuit current ISCCR 25 kA
voltage protection level Up ≤ 0.55 kV
Residual pressure Ures ≤ 0.55 kV (In)
≤ 0.425 kV (10 kA)
≤ 0.325 kV (at 5 kA)
≤ 0.275 kV (at 3 kA)
UT 100V AC (5 seconds/withstand mode)
response time tA ≤ 25 ns
maximum spare fuse with branch wiring 125 A AC (gG)
50 A DC (gG)

environmental conditions
protection level IP20
ambient temperature (operation) -40°C ... 80°C
ambient temperature (storage/transport) -40°C ... 80°C
elevation ≤ 2000 m (amsl)
Allowable humidity (operating) 5%... 95%
Impact Force (Operation) 25g (half sine/11 ms/ 3x ± X,± Y, ± Z)
vibration (operation) 5g (10 ... 500Hz / 2.5 h / X,Y,Z)

Phoenix VAL-MS 60 ST-2 class surge protector 2807573

Created on:2025-09-18 09:28

News Dynamics

NEWS