Phoenix CABLE-D37SUB/B/B/HF/S/15,0M-cable 2908523, prefabricated shielded halogen-free round cable; connection 1: D-SUB hole socket board (1x 37-position); connection 2: D-SUB hole socket board (1x 37-position); cable length: 15 m
| Product Type |
System Cable |
| environmental conditions |
| protection level |
IP20 |
| protection level (installation position) |
≥ IP54 (installation position) |
| Ambient temperature (operating) (fixed installation) |
-40°C ... 70°C (fixed installation) |
| ambient temperature (operating) (movable installation) |
-10°C ... 70°C (movable installation) |
| ambient temperature (storage/transport) |
-40°C ... 80°C |
| elevation |
≤ 2000 m |
| Nominal operating voltage (AC) |
≤ 30V AC |
| Nominal operating voltage (DC) |
≤ 60V DC |
| Rated operating mode |
100% Eligible |
| current (per path) |
≤ 2 A (expanded, see attenuation) |
| Cable Length |
15 m |
| UL AWM |
21946 |
| Bits |
37 |
| Shielding |
have |
| Wire Model |
prefabricated shield |
| wire structure signal line |
14x 0.15mm |
| AWG, signal wire |
24 |
| Wire Cross Section |
37x 0.25 mm² |
| wire diameter, including insulation |
1.2mm ± 0.05mm |
| Cable outer diameter |
10.80mm ± 0.5mm |
| outer sheath, material |
Halogen-free sheath |
| outer sheath, color |
Grey |
| Wire Material |
copper stranded wire |
| Cable resistance |
≤ 80 Ω/km (at 20°C) |
| insulation resistance |
≥ 20 MΩ * km (at 20°C) |
| minimum bending radius, fixed mounting |
90mm |
| minimum bending radius, mobile installation |
170mm |
| Dynamic Load Capacity (Bending) |
: 5000 (radius ≥ 15x outer diameter) |
| Halogen-free |
is |
| flame retardant |
IEC 60332-1-2 (bare cable) |
| VDE 0842, Part 332-1-2 (Bare cables) |
| IEC 60332-3-22 (bare cable) |
| oil resistance |
Resistance to occasional welding chip spatter (bare cable) |
| connection 1 |
| connection meets standards |
IEC 60807-2 |
| DIN 41652 |
| Connection Mode |
D-SUB hole socket plate |
| thread |
UNC 4-40 |
| connection quantity |
1 |
| Bits |
37 |
| Tightening torque |
0.2 Nm |
| Insertion/unplugging cycle |
> 200 |
| needle pitch |
2.77mm |
| Connection 2 |
| connection meets standards |
IEC 60807-2 |
| DIN 41652 |
| Connection Mode |
D-SUB hole socket plate |
| thread |
UNC 4-40 |
| connection quantity |
1 |
| Bits |
37 |
| Tightening torque |
0.2 Nm |
| Insertion/unplugging cycle |
> 200 |
| needle pitch |
2.77mm |
