Phoenix CABLE-FLK14/OE/0, 14/50-cable 2305761, round system cable; connection 1: single wire (14-position) (cable marked and equipped with sleeve); connection 2: IDC/FLK hole connector (1x 14-position); cable length: 0.5 m
| Product Type |
System Cable |
| environmental conditions |
| protection level |
IP00 |
| protection level (installation position) |
≥ IP54 (installation position) |
| Ambient temperature (operating) (fixed installation) |
-40°C ... 70°C (fixed installation) |
| ambient temperature (operating) (movable installation) |
-10°C ... 70°C (movable installation) |
| ambient temperature (storage/transport) |
-40°C ... 80°C |
| elevation |
≤ 2000 m |
| Nominal operating voltage (AC) |
≤ 30V AC |
| Nominal operating voltage (DC) |
≤ 60V DC |
| Rated operating mode |
100% Eligible |
| current (per path, 50°C) |
≤ 1 A (expanded, see attenuation) |
| current (per path, 70°C) |
≤ 0.6 A (expanded, see attenuation) |
| Cable Length |
0.5 m |
| 14X0.14 [PVC] |
| UL AWM |
2464/1061 |
| Bits |
14 |
| Shielding |
None |
| Cable Type |
14X0.14 [PVC] |
| Wire Model |
Circular System Cable |
| wire structure signal line |
7x 0.16mm |
| AWG, signal wire |
26 |
| Wire Cross Section |
14x 0.14 mm² |
| wire diameter, including insulation |
1 mm ± 0.03mm |
| Cable outer diameter |
6.40mm ± 0.4mm |
| outer sheath, material |
semi-rigid PVC |
| outer sheath, color |
Grey |
| Wire Material |
tinned copper stranded wire |
| Cable resistance |
≤ 145 Ω/km (20 °C) |
| insulation resistance |
≥ 20 MΩ*km (20 °C) |
| minimum bending radius, fixed mounting |
55mm |
| minimum bending radius, mobile installation |
104mm |
| Dynamic Load Capacity (Bending) |
: 5000 (radius ≥ 15x outer diameter) |
| Halogen-free |
No |
| flame retardant |
IEC 60332-1-2 (bare cable) |
| VDE 0842, Part 332-1-2 (Bare cables) |
| IEC 60332-3-22 (bare cable) |
| UL VW-1 |
| CSA FT-1 |
| oil resistance |
Resistance to occasional welding chip spatter (bare cable) |
| Cable Type |
cables for connecting modules |
| color coding: single line |
| Black |
IDC/FLK14 (1) = () |
| Brown |
IDC/FLK14 (2) = () |
| Red |
IDC/FLK14 (3) = () |
| Orange |
IDC/FLK14 (4) = () |
| yellow |
IDC/FLK14 (5) = () |
| Green |
IDC/FLK14 (6) = () |
| Blue |
IDC/FLK14 (7) = () |
| purple |
IDC/FLK14 (8) = () |
| Grey |
IDC/FLK14 (9) = () |
| White |
IDC/FLK14 (10) = () |
| White-Black |
IDC/FLK14 (11) = () |
| White-Brown |
IDC/FLK14 (12) = () |
| White-Red |
IDC/FLK14 (13) = () |
| White-Orange |
IDC/FLK14 (14) = () |
| connection 1 |
| Connection Mode |
single line |
| stripping length (sheath) |
150mm |
| Bits |
14 |
| Considerations |
Cables marked and fitted with sleeves |
| Connection 2 |
| connection meets standards |
IEC 60603-13 (compliance) |
| Connection Mode |
IDC/FLK Hole Connectors |
| connection quantity |
1 |
| Bits |
14 |
| Insertion/unplugging cycle |
> 50 |
| needle pitch |
2.54mm |
