Phoenix PT 4-24AC-ST-Surge Protector-Plug and unplug 2800078, protection plug PT, used for protection of 4-wire floating ground signal circuit. Rated voltage: 24V AC
| Product Type | measurement and control technology |
| Product Series | PLUGTRAB PT |
| IEC Category | C1 |
| C2 | |
| C3 | |
| D1 | |
| type | needle type |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated voltage UN | 24V AC |
| Connection Mode | screw connection (connection to the base) |
| thread | M3 |
| Tightening torque | 0.5 Nm |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Rigid conductor cross section | 0.2 mm² ... 4 mm² |
| Attachable Guide Cross Section AWG | 24 ... 12 |
| Dimensional drawing | |
| width | 17.7mm |
| height | 45mm |
| depth | 52mm |
| Horizontal stitch pitch | 1 Partition |
| full module width | 17.7mm |
| Full module height | 90mm |
| full module depth | 65.5mm |
| color | black (RAL 9005) |
| flame retardant rating to UL 94 | V-0 |
| Shell Material | PA 6.6 |
| Mechanical parameters | |
| Open Side Panel | No |
| movement direction | Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground |
| Maximum continuous operating voltage UC | 40V DC |
| 28V AC | |
| Rated current | 2 A AC (80 °C) |
| 500 mA DC (80 °C) | |
| UC, the effective working current IC | ≤ 5 µA |
| Residual Flow IPE | ≤ 4 & micro;A (with PT 4-BE) |
| ≤ 1 & micro;A (with PT 4 F-BE) | |
| Nominal discharge current In(8/20) & micro;s (core-core) | 187 A |
| Rated discharge current In(8/20)& micro;s (core-ground) | 10 kA |
| pulse discharge current Iimp(10/350) µs | 2.5 kA |
| Total discharge current ITotal(8/20) µs | 20 kA |
| Maximum discharge current Imax(8/20) & micro;s (core-core) | 187 A |
| Maximum discharge current Imax(8/20) & micro;s (core-ground) | 10 kA |
| rated power pulse current lan (1000)& micro;s (core-core) | 36 A |
| Output voltage limit 1 kV/& micro;s (core-to-core) peak | ≤ 75V |
| Output voltage limit 1 kV/& micro;s (core-ground) peak | ≤ 450V (with PT 4-BE) |
| ≤ 1 kV (with PT 4 F-BE) | |
| Output voltage limit 1 kV/& micro;s (core-core) static | ≤ 75V |
| Output voltage limit 1 kV/& micro;s (core-ground) static | ≤ 25 kV (with PT 4-BE) |
| ≤ 50V (with PT 4 F-BE) | |
| Residual voltage ln,(wire-wire) | ≤ 105V |
| Residual voltage lan(10/1000)& micro;s (wire-wire) | ≤ 80V |
| voltage protection level Up(core-core) | ≤ 85V (C1 - 500V / 250 A) |
| ≤ 70V (C3 - 10 A) | |
| ≤ 75V (C3 - 25 A) | |
| voltage protection level Up(Line-Ground) | ≤ 450V (C2-10 kV / 5 kA with PT 4-BE) |
| ≤ 1 kV (C2-10 kV / 5 kA with PT 4 F-BE) | |
| voltage protection level Upstatic (core-ground) | ≤ 50V (C2-10 kV / 5 kA with PT 4-BE) |
| ≤ 100V (C2-10 kV / 5 kA with PT 4 F-BE) |
Phoenix PT 4-24AC-ST-Surge Protector-Plug and Plug 2800078
Created on：2025-09-19 09:29
