Phoenix SAC-12P-20,0-35T/FS SH SCO-sensor/actuator cable 1406416, sensor/actuator cable, 12-position, PUR/PVC, black RAL 9005, shielded, free outlet, SPEEDCON with hole type straight head M12, code: A, cable length: 20 m
Product Type
Sensor/Actuator Cable
Bits
12
Outlet No.
1
Shielding
have
coding
A
insulation characteristics
Overvoltage Category
II
pollution level
3
Material Specification
flame retardant rating, according to UL 94
V0
sealing material
NBR
Fixture body material
TPU, high flame retardancy, self-extinguishing properties
Contact Material
CuZn
Material Contact Surface
Ni/Au
Contact Carrier Material
PA 6.6
screw connection material
zinc cast, nickel plated
Electrical characteristics
insulation resistance
≥ 100 MΩ
Rated voltage UN
30V AC
30V DC
Rated current IN
1.5 A
Signal Processing
Status Display
None
Status Display
No
Connector
connection 1
type
Free Outlet
Connection 2
type
hole type straight head M12 SPEEDCON
Bits
12
Lock Type
SPEEDCON
Error-proofing code type
A
cable/wire
Cable Length
20 m
Black PUR/PVC Twisted Pair [35T]
Dimensional drawing
Cable Weight
87 kg/km
UL AWM
20233 / 1061 (80°C/300 V)
Bits
12
Shielding
have
Cable Type
Black PUR/PVC Twisted Pair [35T]
wire structure signal line
18x 0.10mm
AWG, signal wire
26
Wire Cross Section
12x 0.14 mm² (signal line)
wire diameter, including insulation
1 mm ± 0.05mm (signal line)
Cable outer diameter
8.50mm ± 0.2mm
outer sheath, material
PUR
outer sheath, color
Black RAL 9005
Wire Material
tinned copper stranded wire
wire insulation material
PVC
single line, color
white-brown, green-yellow, gray-pink, blue-red, black-purple, gray/pink-red/blue
Twisted Pair
2 wires as a pair
Total Strand
6 pairs of cores wound on filled cores
Cable Shielding Cover
85%
Maximum conductor resistance
≤ 142 Ω/km (at 20°C)
insulation resistance
≥ 10 MΩ * km (at 20°C)
Rated voltage, cable
42V AC
Test Voltage
1500V AC
minimum bending radius, fixed installation
5 x D
minimum bending radius, movable installation
10 x D
minimum bending radius, fixed mounting
43mm
minimum bending radius, mobile installation
85mm
Dynamic Load Capacity (Bending)
Maximum bending times: 200000, Bending radius: 85mm, Lateral trajectory: 10 m, Lateral speed: 3 m/s, Acceleration: 10 m/s
flame retardant
conforming to DIN EN 60332-1-2
meets VW-1
oil resistance
according to DIN EN 60811-2-1
Other protective functions
waterproof and resistant to bacterial corrosion (according to EN 50396)
special nature
can be used for drag chain
ambient temperature (operation)
-40°C ... 80°C (cable, fixed installation)
-5°C ... 80°C (cable, movable installation)
environment and real conditions
environmental conditions
protection level
IP65
IP67
ambient temperature (operation)
-25°C ... 90°C (pin/hole)
-40°C ... 80°C (cable, fixed installation)
-5°C ... 80°C (cable, movable installation)
