Phoenix CABLE-D-25SUB/F/OE/0,25/S/1,0M-cable 2926166, prefabricated round shielded cable; connection 1: single wire (25-position) (the cable is marked and equipped with a sleeve. The braided shield is connected to both ends of the cable.); Connection 2: D-SUB-hole socket board (1x 25-position); Cable length: 1 m

Product Type System Cable

environmental conditions
protection level IP20
protection level (installation position) ≥ IP54 (installation position)
Ambient temperature (operating) (fixed installation) -40°C ... 70°C (fixed installation)
ambient temperature (operating) (movable installation) -10°C ... 70°C (movable installation)
ambient temperature (storage/transport) -40°C ... 80°C
elevation ≤ 2000 m

Nominal operating voltage (AC) ≤ 30V AC
Nominal operating voltage (DC) ≤ 60V DC
Rated operating mode 100% Eligible
current (per path) ≤ 2 A (expanded, see attenuation)

Cable Length 1 m
25X0.25 [PVC]
UL AWM 2464/1061
Bits 25
Shielding have
Cable Type 25X0.25 [PVC]
Wire Model prefabricated circular shielded cable
wire structure signal line 14x 0.15mm
AWG, signal wire 24
Wire Cross Section 25x 0.25 mm²
wire diameter, including insulation 1.2mm ± 0.05mm
Cable outer diameter 9.80mm ± 0.5mm
outer sheath, material semi-rigid PVC
outer sheath, color Grey
Wire Material copper stranded wire
Cable resistance ≤ 80 Ω/km (at 20°C)
insulation resistance ≥ 20 MΩ * km (at 20°C)
minimum bending radius, fixed mounting 82mm
minimum bending radius, mobile installation 155mm
Dynamic Load Capacity (Bending) : 5000 (radius ≥ 15x outer diameter)
Halogen-free No
flame retardant IEC 60332-1-2 (bare cable)
VDE 0842, Part 332-1-2 (Bare cables)
IEC 60332-3-22 (bare cable)
UL VW-1
CSA FT-1
oil resistance Resistance to occasional welding chip spatter (bare cable)
color coding: single line
White D-SUB25 (1) = ()
Brown D-SUB25 (2) = ()
Green D-SUB25 (3) = ()
yellow D-SUB25 (4) = ()
Grey D-SUB25 (5) = ()
pink D-SUB25 (6) = ()
Blue D-SUB25 (7) = ()
Red D-SUB25 (8) = ()
Black D-SUB25 (9) = ()
purple D-SUB25 (10) = ()
Grey-pink D-SUB25 (11) = ()
Red-Blue D-SUB25 (12) = ()
White-Green D-SUB25 (13) = ()
Brown-Green D-SUB25 (14) = ()
White-Yellow D-SUB25 (15) = ()
yellow-brown D-SUB25 (16) = ()
white-gray D-SUB25 (17) = ()
Grey-Brown D-SUB25 (18) = ()
White-pink D-SUB25 (19) = ()
pink-Brown D-SUB25 (20) = ()
White-Blue D-SUB25 (21) = ()
Brown-Blue D-SUB25 (22) = ()
White-Red D-SUB25 (23) = ()
Brown-Red D-SUB25 (24) = ()
White-Black D-SUB25 (25) = ()

connection 1
Connection Mode single line
stripping length (sheath) 150mm
Bits 25
Considerations cables are marked and fitted with sleeves. The braided shields are attached to both ends of the cable respectively.
Connection 2
connection meets standards IEC 60807-2
DIN 41652
Connection Mode D-SUB hole socket board
thread UNC 4-40
connection quantity 1
Bits 25
Tightening torque 0.2 Nm
Insertion/unplugging cycle > 200
needle pitch 2.77mm

Phoenix CABLE-D-25SUB/F/OE/0,25/S/1,0M-Cable 2926166

Created on:2025-09-22 14:34

News Dynamics

NEWS