Phoenix CABLE-FCN40/4X14/ 2,0M/M340-cable 2321732, circular system cable; Controller: MODICON® M340 (BMX DDI 3202K, BMX DDI 6402K, BMX DD0 3202K, BMX DD0 6402K, BMX DDM 3202K); Connection 1: Fujitsu plug-in connector (1x 40-position); Connection 2: IDC/x 14 K hole position 4m connector
| Product Type |
System Cable |
| environmental conditions |
| protection level |
IP00 |
| protection level (installation position) |
≥ IP54 (installation position) |
| Ambient temperature (operating) (fixed installation) |
-40°C ... 70°C (fixed installation) |
| ambient temperature (operating) (movable installation) |
-10°C ... 70°C (movable installation) |
| ambient temperature (storage/transport) |
-40°C ... 80°C |
| elevation |
≤ 2000 m |
| Nominal operating voltage (AC) |
≤ 30V AC |
| Nominal operating voltage (DC) |
≤ 60V DC |
| Rated operating mode |
100% Eligible |
| current (per path, 50°C) |
≤ 1 A (expanded, see attenuation) |
| current (per path, 70°C) |
≤ 0.6 A (expanded, see attenuation) |
| supported controllers SCHNEIDER ELECTRIC Modicon M340 |
| Applicable I/O Card |
BMX DDI 3202K |
| BMX DDI 6402K |
| BMX DD0 3202K |
| BMX DD0 6402K |
| BMX DDM 3202K |
| Cable Length |
2 m |
| 10X0.14 [PVC] |
| UL AWM |
2464/1061 |
| Bits |
10 |
| Shielding |
None |
| Cable Type |
10X0.14 [PVC] |
| Wire Model |
Circular System Cable |
| wire structure signal line |
7x 0.16mm |
| AWG, signal wire |
26 |
| Wire Cross Section |
10x 0.14 mm² |
| wire diameter, including insulation |
1 mm ± 0.03mm |
| Cable outer diameter |
6.10mm ± 0.4mm |
| outer sheath, material |
semi-rigid PVC |
| outer sheath, color |
Grey |
| Wire Material |
tinned copper stranded wire |
| Cable resistance |
≤ 145 Ω/km (20 °C) |
| insulation resistance |
≥ 20 MΩ*km (20 °C) |
| minimum bending radius, fixed mounting |
52mm |
| minimum bending radius, mobile installation |
98mm |
| Dynamic Load Capacity (Bending) |
Maximum bending times: 5000 |
| Halogen-free |
No |
| flame retardant |
IEC 60332-1-2 (bare cable) |
| VDE 0842, Part 332-1-2 (Bare cables) |
| IEC 60332-3-22 (bare cable) |
| UL VW-1 |
| CSA FT-1 |
| oil resistance |
Resistance to occasional welding chip spatter (bare cable) |
| Cable Type |
tap cables for four modules |
| color coding: single line |
| Black |
X1 (B20) = X2 (1) |
| Brown |
X1 (A20) = X2 (2) |
| Red |
X1 (B19) = X2 (3) |
| Orange |
X1 (A19) = X2 (4) |
| yellow |
X1 (B18) = X2 (5) |
| Green |
X1 (A18) = X2 (6) |
| Blue |
X1 (B17) = X2 (7) |
| purple |
X1 (A17) = X2 (8) |
| Grey |
X1 (B12) = X2 (9) |
| White |
X1 (A12) = X2 (10) |
| Black |
X1 (B16) = X3 (1) |
| Brown |
X1 (A16) = X3 (2) |
| Red |
X1 (B15) = X3 (3) |
| Orange |
X1 (A15) = X3 (4) |
| yellow |
X1 (B14) = X3 (5) |
| Green |
X1 (A14) = X3 (6) |
| Blue |
X1 (B13) = X3 (7) |
| purple |
X1 (A13) = X3 (8) |
| Grey |
X1 (B11) = X3 (9) |
| White |
X1 (A11) = X3 (10) |
| Black |
X1 (B10) = X4 (1) |
| Brown |
X1 (A10) = X4 (2) |
| Red |
X1 (B9) = X4 (3) |
| Orange |
X1 (A9) = X4 (4) |
| yellow |
X1 (B8) = X4 (5) |
| Green |
X1 (A8) = X4 (6) |
| Blue |
X1 (B7) = X4 (7) |
| purple |
X1 (A7) = X4 (8) |
| Grey |
X1 (B2) = X4 (9) |
| White |
X1 (A2) = X4 (10) |
| Black |
X1 (B6) = X5 (1) |
| Brown |
X1 (A6) = X5 (2) |
| Red |
X1 (B5) = X5 (3) |
| Orange |
X1 (A5) = X5 (4) |
| yellow |
X1 (B4) = X5 (5) |
| Green |
X1 (A4) = X5 (6) |
| Blue |
X1 (B3) = X5 (7) |
| purple |
X1 (A3) = X5 (8) |
| Grey |
X1 (B1) = X5 (9) |
| White |
X1 (A1) = X5 (10) |
| X1 |
| Connection Mode |
Fujitsu plug-in connector |
| type |
FCN 367 |
| connection quantity |
1 |
| Bits |
40 |
| Insertion/unplugging cycle |
> 50 |
| needle pitch |
2.54mm |
| X2. .. X5 |
| connection meets standards |
IEC 60603-13 (compliance) |
| Connection Mode |
IDC/FLK Hole Connectors |
| connection quantity |
4 |
| Bits |
14 |
| Insertion/unplugging cycle |
> 50 |
| needle pitch |
2.54mm |
