Phoenix SACC-E Series Industrial Circular Connector Inserts & Assembled Connectors Complete Selection Guide

I. Series Overview: Industrial-Grade Modular Connector Inserts for Signal & Power Assembly

The Phoenix SACC-E series is a full portfolio of industrial-grade modular circular connector inserts, assembled connectors and adapter components engineered for customized assembly, signal/power transmission and interface adaptation in factory automation, industrial cabling and control cabinet connection systems. This series features a core design of insert + housing matching, covering mainstream industrial interfaces (M16/M12/M10/M5/M20), diversified core count configurations (4/5/8/12-core) and functional coding (CON/PL/P), with optional cable lengths (0.5m/2.0m) and professional suffixes (VA/PE/PSCUP/SCO/DN). All variants adopt industrial-grade high-strength thermoplastic materials, support IP67 ingress protection (when mated), EMC anti-interference shielding and wide operating temperature tolerance (-40°C to +85°C). Designed for flexible on-site assembly, plug-and-play deployment and perfect compatibility with Phoenix SACC series circular connector housings, the SACC-E series provides a highly customizable connection solution for harsh industrial environments, realizing stable signal/power transmission for field sensors, actuators, controllers and industrial equipment.

Core Advantages

1. Full-Interface & Core Count Coverage: Supports M16/M12/M10/M5/M20 mainstream industrial interfaces, matching 4/5/8/12-core signal/power transmission requirements, covering compact micro-connection and high-density multi-channel transmission scenarios.
2. Modular Customized Design: Adopts insert-housing split structure for free combination with SACC series housings; flexible matching of core count, cable length and functional suffixes to meet personalized project connection needs.
3. Industrial-Grade Reliability & Durability: Reinforced metal/plastic contact pins, gold-plated conductive terminals with ≥10,000 mating cycles; anti-vibration, anti-abrasion and anti-corrosion, ensuring stable operation in high-vibration/harsh field environments.
4. Rich Functional Suffix Matching: Integrates VA (voltage compliance), PE (protective earth), PSCUP (special assembly), SCO (standardized compatibility) and DN (polarity protection) suffixes, complying with industrial safety and system compatibility standards.
5. Effortless Assembly & Installation: Tool-free bayonet locking for fast insert-housing assembly; pre-fixed cable lengths (0.5m/2.0m) for compact wiring; compact footprint that saves cabinet/field installation space.

II. Product Classification & Detailed Parameter Table

Strictly aligned with your part number list, the series is categorized by core interface specification & subseries for clear differentiation, with a complete parameter table including Part No., Complete Model, Core Parameters, Key Features and Application Scenarios for 1:1 model matching and direct procurement reference (all models follow industrial-grade design standards, with anti-interference and stable contact as default characteristics).

III. Nomenclature Decoding: SACC-E Series Model Structure & Full Definition

Universal Model Format

SACC-E-[Subseries]-[Core Count+Function Code]-[Interface/Gland Spec]-[Length]-[Suffix]

Key Component & Suffix Interpretation (Critical for Selection)

• SACC-E: Phoenix industrial circular connector insert & assembled connector series identifier
• Core Subseries (Type Differentiator):
  • MU = Universal insert (matching SACC-E series housings for customized assembly)
  • MS = Standard male connector/insert (mainstream male straight type for signal/power)
  • MINMS/MINFS = Miniature male/female connector (PG13 interface, ultra-compact design)
  • M8MS/M8FS = M8 male/female connector (M8 interface with M10 adapter)
  • M5FS = M5 female connector (ultra-micro M5 interface for miniature devices)
  • M12MST/MSS/MS = M12 special adapter/standard connector (M12 full-range variants)
• Core Count & Functional Coding (Core Parameter):
  • CON = Universal coding (mixed signal + power transmission, the most versatile)
  • PL = Power-optimized (low contact resistance for pure power distribution)
  • P = Power enhanced (reinforced conductivity for medium/high-current transmission)
  • 4/5/8/12 = Core count (matching channel requirements of signal/power transmission)
• Interface & Gland Specification:
  • M16/M12/M10/M5/M20 = Industrial circular connector interface size (core mechanical match)
  • PG9/PG13 = Cable gland specification (PG9=5-9mm cables, PG13=8-13mm cables)
  • M16XL = Extended M16 interface (for high-current/heavy-duty connection)
  • SQ26 = Square interface (special mechanical match for project-specific equipment)
• Critical Suffixes & Features:
  • 0,5/2,0 = Pre-fixed cable length (meter), for compact/extended wiring
  • SCO = Standardized compatibility suffix (matching Phoenix SCO assembly system)
  • VA = Voltage compliance (meets regional industrial voltage safety regulations)
  • PE = Protective earth (dedicated for PE line connection, electrical safety)
  • DN = Polarity protection (anti-reverse connection for power transmission)
  • PSCUP = Special assembly suffix (customized for project-specific system matching)

IV. 3-Step Quick Selection Technique (100% Accurate Matching)

Follow the interface specification matching → core count & function selection → suffix & length confirmation logic to quickly lock the correct model, avoid complex parameter comparison and fully adapt to industrial signal/power connection and interface conversion requirements.

Step 1: Match the Corresponding Series by Target Interface Specification

• M16 mainstream industrial interface → SACC-E-MU/MS series (1504097/1523492)
• PG13 miniature cabinet interface → SACC-E-MINMS/MINFS series (1521452/1521423)
• M8 compact field sensor interface → SACC-E-M8MS/M8FS series (1424232/1424231)
• M5 ultra-micro device interface → SACC-E-M5FS series (1530618)
• M12 industrial control mainstream interface → SACC-E-M12 MST/MSS/MS series (1424140/1513774)
• M20 high-power heavy-duty interface → M20 suffix M12MS variants (1452107/1139804)

Step 2: Select Core Count & Functional Coding by Transmission Demand

• General mixed signal + power transmission (most common) → CON coding variants (all CON marked models)
• Pure power distribution/heavy-duty current transmission → PL/P coding variants (1139804/1411579)
• Channel count matching: 4-core for basic signal/power (1523450/1530618);5-core for medium-channel (1520055/1671111);8-core for high-channel (1523492/1513774);12-core for high-density (1556265)

Step 3: Confirm Cable Length & Special Functional Suffixes

• Compact cabinet/narrow space wiring → 0,5m short cable variants (all 0,5 marked models)
• Medium-distance field/equipment interconnection → 2,0m extended cable variants (1416285)
• Voltage regulatory compliance requirements → VA suffix variants (1452107/1554568)
• PE/protective earth line connection → PE suffix variants (1411655)
• Polarity safety for power transmission → DN suffix variants (1424234)
• Project-specific customized assembly → PSCUP suffix variants (1436398/1436437)
• Phoenix SCO system matching → SCO suffix variants (1523492/1520055)

V. Selection Pitfall Avoidance Guide (Critical for Connection Stability)

Avoid the 6 most common selection errors of the SACC-E series to ensure mechanical matching, electrical safety and transmission stability in harsh industrial environments, eliminating connector misassembly, signal loss and power failure risks.

1. Interface Mismatch: M12 device connection using M16-only inserts/connectors → Strictly verify the target device interface size (M16/M12/M8/M5) and select the corresponding series to ensure mechanical fit.
2. Functional Coding Misuse: High-power transmission using CON (signal) coding variants → Select PL/P power-optimized variants (1139804/1411579) to avoid overheating and contact resistance issues.
3. Cable Length Miscalculation: Tensioned wiring due to insufficient cable length → Select 2.0m extended variants (1416285) or cascade connectors; avoid signal/power loss caused by cable stretching.
4. Safety Suffix Omission: High-voltage/PE line projects without VA/PE suffixes → Add VA (voltage compliance) and PE (protective earth) variants (1452107/1411655) to meet industrial safety standards.
5. Gland Spec Error: PG9 gland for 12mm cables / PG13 for 6mm cables → Match PG gland size to actual cable diameter (PG9=5-9mm, PG13=8-13mm) to ensure dust/waterproof performance.
6. Custom Assembly Neglect: Project-specific systems using non-PSCUP variants → Select PSCUP suffix models (1436398/1436437) for customized assembly and ensure system compatibility.

VI. Conclusion: Core Modular Components for Industrial Circular Connector Assembly

The Phoenix SACC-E series delivers a comprehensive industrial circular connector insert and assembled connector solution covering universal inserts, standard connectors and interface adapters, with diversified interface specifications (M16/M12/M8/M5/M20), core count configurations and functional suffixes. These components are the foundational building blocks for customized industrial connector assembly, realizing stable signal/power transmission and flexible interface conversion for field sensors, actuators, controllers and industrial equipment in harsh industrial environments. With modular design, industrial-grade reliability and rich functional matching, the SACC-E series perfectly matches small-scale compact micro-connection, medium-scale industrial control wiring and large-scale high-density automation system connection, and seamlessly integrates with Phoenix SACC series housings to form a complete industrial circular connector ecosystem.