Phoenix TRIO-DIODE/48DC/2X10/1X20-Redundant module 2866527, redundant module for function monitoring, 48V DC,2x 10A,1x 20A
| DC operation | |
| Rated input voltage range | 48V DC |
| Input Voltage Range | 30V DC ... 56V DC |
| Supply Voltage | DC |
| prevents polarity reversal | <is 60V |
| Rated input current (IN) | 2x 10 A (-25°C ... 55 °C) |
| 1x 20 A (-25°C ... 55 °C) | |
| Maximum current Imax | 2x 15 A (-25°C ... 40 °C) |
| 1x 30 A (-25°C ... 40 °C) | |
| Transient overvoltage protection | varistor |
| voltage drop, input/output | approx. 0.65V |
| efficiency | > 97% |
| Rated output voltage | UIn- 0,65V |
| Rated output current (IN) | 20 A (increased power) |
| 10 A (redundant) | |
| Attenuation | 55°C ... 70°C (2.5 %/K) |
| maximum no-load power consumption | 7W (IOUT= 10 A) |
| Maximum rated load power loss | 14W (IOUT= 20 A) |
| Concatenation | No |
| signal: Floating redundant OK | |
| Output Description | when uIN1 & UIN2 > 28V |
| maximum switching voltage | 30V AC/DC |
| Maximum starting current | ≤ 100 mA (short-circuit protection) |
| Input | |
| Connection Mode | screw connection |
| Minimum cross section of rigid conductor | 0.2 mm² |
| Maximum cross section of rigid conductor | 2.5 mm² |
| flexible lead | 0.2 mm² |
| Flexible lead maximum cross section | 2.5 mm² |
| Minimum Wire Cross Section AWG | 24 |
| Maximum conductor cross section AWG | 14 |
| stripping length | 9mm |
| thread | M2,5 |
| Minimum tightening torque | 0.4 Nm |
| Maximum tightening torque | 0.5 Nm |
| Output | |
| Connection Mode | screw connection |
| Minimum cross section of rigid conductor | 0.5 mm² |
| Maximum cross section of rigid conductor | 6 mm² |
| flexible lead | 0.5 mm² |
| Flexible lead maximum cross section | 4 mm² |
| Minimum Wire Cross Section AWG | 20 |
| Maximum conductor cross section AWG | 10 |
| stripping length | 14mm |
| thread | M3 |
| Minimum tightening torque | 0.5 Nm |
| Maximum tightening torque | 0.6 Nm |
Phoenix TRIO-DIODE/48DC/2X10/1X20-Redundant Module 2866527
