Phoenix TRIO-PS-2G/3AC/24DC/20-power supply 2903155, TRIO POWER switching power supply with in-line connection, suitable for DIN rail installation, three-phase input, output: 24V DC/20 A
AC operation
Network Type
star network
Rated input voltage range
3x 400V AC ... 500V AC
2x 400V AC ... 500V AC
Input Voltage Range
3x 400V AC ... 500V AC -20 % ... +15%
2x 400V AC ... 500V AC -10 % ... +15%
AC input voltage range
3x 320V AC ... 575V AC
National Grid Typical Voltage
3x 400V AC
3x 480V AC
Supply Voltage
AC
Impulse current
≤ 22 A (typical)
impulse current integral (I2t)
≤ 0.5 A2s
AC frequency range
50Hz ... 60Hz
grid buffer time
Typical 10 ms (400V AC)
Typical 20 ms (500V AC)
power consumption
3x 1.2 A (400V AC)
3x 1 A (500V AC)
2x 2.3 A (400V AC)
2x 1.9 A (500V AC)
Rated power consumption
822.2 VA
protection circuit
transient surge protection; varistor
power factor (cos phi)
0.63
Typical Response Time
< 1 s
input fuse
3.15 A (built-in (device protection) slow fuse)
recommend use
6 A ... 16 A (characteristics B, C, D, K)
PE discharge current
< 3.5 mA
< (550V AC, 60 Hz)
efficiency
> 93 % (400V AC)
500V AC
output characteristics
U/ I with dynamic load reserve
Rated output voltage
24V DC ±1%
output voltage (USet) setting range
24V DC ... 28V DC (> 24V DC, stable capacity limit)
Rated output current (IN)
20 A
Dynamic Boost (IDyn.Boost)
30 A (5 s)
Attenuation
> 60°C ... 70°C (2.5 %/K)
output
≤ 30V DC
control deviation
<1% (load change, static 10%... 90%)
<3% (dynamic load change 10%... 90%, 10Hz)
< 0.1 % (input voltage variation is ± 10 %)
residual wave
≤ 20 mVSS
Short-circuit protection
is
Anti-aircraft turn
is
output power
480W
720W
maximum no-load power consumption
< 1.2W (400V AC)
Maximum rated load power loss
< 38W (480V AC)
rise time
≤ 120 ms (UOUT(10%... 90%))
and connect
Yes, for redundancy and increased capacity
Concatenation
is
signal: DC OK
Continuous load current
100 mA
signal relay 13/14
Default (Value)
closed
digital quantity
30V AC 30V DC 100 mA
Input
Connection Mode
in-line connection
Minimum cross section of rigid conductor
0.2 mm²
Maximum cross section of rigid conductor
4 mm²
Minimum cross section of flexible lead
0.2 mm²
Flexible lead maximum cross section
2.5 mm²
single wire/terminal point, flexible, with sleeve, minimum
0.2 mm²
Single conductor/connection point, flexible, with sleeve, maximum
