Phoenix SUBCON-PLUS-CAN/AX-D-SUB bus connector 2306566,D-SUB connector, 9-position, hole connector, two axial incoming wires, bus system: CAN,CANopen,SafetyBUS p; pin assignment 2,3,7; Screw terminal block
| Application Description |
| Application Description |
for industrial applications only |
| Use Restrictions |
| CCCex Description |
is not permitted in China for use in potentially explosive areas. |
| Product Type |
Data plug |
| MTTF |
6706 years (SN 29500 standard, temperature 25°C, duty cycle 21%) |
| 1817 years (SN 29500 standard, temperature 40°C, duty cycle 34.25%) |
| 155 years (SN 29500 standard, temperature 40°C, duty cycle 100%) |
| Pin Distribution |
2,3,7 |
| Rated voltage UN |
5V |
| Rated current IN |
100 mA |
| Tightening torque |
... 0.4 Nm |
| D-SUB connection |
| Connection Mode |
D-SUB socket |
| PCB Connection |
| Connection Mode |
screw connection |
| stripping length |
5mm |
| Minimum cross section of rigid conductor |
0.14 mm² |
| Maximum cross section of rigid conductor |
0.5 mm² |
| Minimum cross section of flexible lead |
0.14 mm² |
| Flexible lead maximum cross section |
0.5 mm² |
| Single Wire/End Point, Minimum Rigid AWG |
26 |
| single wire/wiring point, maximum rigid AWG |
20 |
| AWG Wire Minimum Cross Section, Flexible |
26 |
| AWG stranded wire, flexible |
20 |
| bus system |
CAN, CANopen, SafetyBus-P |
| signal |
CAN |
| CANopen® |
| SafetyBUS p |
| Dimensional drawing |
|
| width |
17mm |
| height |
31.5mm |
| length |
58.2mm |
| Identification Material (Shell) |
ABS (metal plating) |
| Cable outer diameter |
7.6mm... 8.4mm (bus line incoming) |
| Mechanical parameters |
| Insertion/unplugging cycle |
> 200 |
| meets EN 60068-2-6/IEC 60068-2-6 anti-vibration standards |
vibration (running): 5g,10 ... 150Hz, 2.5 h, XYZ direction |
| Conform to EN 60068-2-27/IEC 60068-2-27 impact resistance |
impact force (operation): 15g,11 ms, half-sine shock pulse |
