Phoenix SUBCON-PLUS-PROFIB/SC2-D-SUB bus connector 2708232,D-SUB connector, 9-position, pin plug, 35 ° cable outlet, bus system: PROFIBUS DP, maximum transmission speed of 12 Mbps, terminal resistance can be connected by sliding switch, pin assignment: 3, 5, 6, 8; screw terminal
Application Description |
Application Description |
for industrial applications only |
Use Restrictions |
CCCex Description |
is not permitted in China for use in potentially explosive areas. |
Product Type |
Data plug |
MTTF |
6706 years (SN 29500 standard, temperature 25°C, duty cycle 21%) |
1817 years (SN 29500 standard, temperature 40°C, duty cycle 34.25%) |
155 years (SN 29500 standard, temperature 40°C, duty cycle 100%) |
Pin Distribution |
3, 5, 6, 8 |
rated conditions |
0.025W |
Rated voltage UN |
5V |
Rated current IN |
100 mA |
transmission medium |
copper cable |
D-SUB connection |
Connection Mode |
D-SUB connector |
PCB Connection |
Connection Mode |
screw connection |
stripping length |
5mm |
Minimum cross section of rigid conductor |
0.14 mm² |
Maximum cross section of rigid conductor |
1.5 mm² |
flexible lead |
0.14 mm² |
flexible conductor |
1 mm² |
Single Wire/End Point, Minimum Rigid AWG |
26 |
single wire/wiring point, maximum rigid AWG |
16 |
AWG Wire Minimum Cross Section, Flexible |
26 |
AWG stranded wire, flexible |
18 |
bus system |
PROFIBUS DP |
signal |
PROFIBUS |
Dimensional drawing |
|
width |
16.6mm |
height |
39.4mm |
Length |
58mm |
External dimensions |
minimum outside diameter |
7.6mm |
maximum outer diameter |
8.4mm |
Identification Material (Shell) |
ABS (metal plating) |
Cable outer diameter |
7.6mm... 8.4mm (bus line incoming) |
Mechanical parameters |
Insertion/unplugging cycle |
> 200 |
meets EN 60068-2-6/IEC 60068-2-6 anti-vibration standards |
vibration (running): 5g,10 ... 150Hz, 2.5 h, XYZ direction |
Conform to EN 60068-2-27/IEC 60068-2-27 impact resistance |
impact force (operation): 15g,11 ms, half-sine shock pulse |