Phoenix VAL-MS-T1/T 2 600 DC-PV/2 V-FM-1/2 Class 2 lightning protection/surge protector 2801164, lightning protection device/surge protector, used for 2-position insulated grounding 600V DC photovoltaic voltage system, suitable for DIN rail installation, 3-position base element with remote communication contact, three pluggable temperature monitoring protection elements, each plug has status information.
| Product Type | PV Protector |
| Product Series | VALVETRAB MS |
| IEC Category | PV I / II |
| PV T1 / T2 | |
| EN Type | T1 / T2 |
| IEC power supply system | DC |
| type | DIN rail module, split, detachable |
| distance between active and grounded components | 8mm |
| Installation position | Indoor |
| separation device | inside |
| accessibility | accessible |
| Connection Configuration | Y Configuration |
| SPD failure behavior | OCFM (Partition Error Behavior) |
| Surge protection fault alarm | visual status indication window and remote alarm contact |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| indicator/remote signaling | |
| Connection Name | Remote alarm contact |
| switching function | changeover contact |
| Nominal operating voltage | 5V AC ... 250V AC |
| 30V DC | |
| Operating current | 5 mA AC ... 1.5 A AC |
| 1 A DC | |
| Connection Mode | screw connection |
| thread | M5 |
| Tightening torque | 3 Nm (1.5 mm² ... 16 mm²) |
| 4.5 Nm (25 mm² ... 35 mm²) | |
| stripping length | 16mm |
| Flexible Wire Cross Section | 1.5 mm² ... 25 mm² |
| Rigid conductor cross section | 1.5 mm² ... 35 mm² |
| Attachable Guide Cross Section AWG | 15 ... 2 |
| Connection Mode | fork cable end |
| Flexible Wire Cross Section | 1.5 mm² ... 16 mm² |
| Remote alarm contact | |
| Connection Mode | COMBICON in-line/screw connection |
| thread | M2 |
| Tightening torque | 0.25 Nm |
| stripping length | 7mm |
| Flexible Wire Cross Section | 0.14 mm² ... 1.5 mm² |
| Rigid conductor cross section | 0.14 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG | 28 ... 16 |