Phoenix UKH 50-high current terminal 3009118, high current terminal, nominal working voltage: 1000V, rated current: 150 A, connection quantity: 2, number of digits: 1, connection mode: screw connection, rated connection capacity: 50mm2, cross section: 16 mm2 -70mm2, installation mode: NS 35/7,5, NS 35/15, NS 32, NS 35/15-2,3, color: gray
| Overview |
| Considerations |
For reliable connection of multi-strand conductors, it is recommended to untwist them. |
| Product Type |
High current terminal |
| Bits |
1 |
| connection quantity |
2 |
| Rows |
1 |
| potential |
1 |
| insulation characteristics |
| Overvoltage Category |
III |
| pollution level |
3 |
| Rated surge voltage |
8 kV |
| rated conditions |
4.73W |
| the number of connections per layer |
2 |
| Rated cross section |
50 mm² |
| thread |
M6 |
| Tightening torque |
6 ... 8 Nm |
| stripping length |
24mm |
| plug gauge |
B10 |
| connection meets standards |
IEC 60947-7-1 |
| Rigid conductor cross section |
16 mm² ... 70 mm² |
| cross-section AWG |
4 ... 2/0 (as amended by IEC standards) |
| Flexible Wire Cross Section |
25 mm² ... 70 mm² |
| WIRE CROSS SECTION, FLEXIBLE [AWG] |
2 ... 2/0 (as amended by IEC standards) |
| Flexible conductor cross-section (sleeve without plastic insulation) |
25 mm² ... 50 mm² |
| flexible conductor cross-section (sleeve with plastic insulating tube) |
25 mm² ... 50 mm² |
| 2 wires of the same cross section, rigid wire |
10 mm² ... 16 mm² |
| 2 wires with the same cross section, flexible wire |
10 mm² ... 16 mm² |
| 2 wires with the same cross section, flexible, with sleeve but not plastic sleeve |
10 mm² ... 16 mm² |
| Nominal current |
150 A |
| Maximum load current |
150 A (connectable conductor cross section 50 mm²) |
| Rated voltage |
1000V |
| Considerations |
Note: Product release, wiring capacity, and notes on aluminum wire connections can be found in the download area. |
| Rated cross section |
50 mm² |
| rated parameters (ATEX/IECEx) |
| identification |
II 2 GD Ex eb IIC Gb |
| Operating temperature range |
-60°C ... 110°C |
| Ex Certified Accessories |
1205082 SZS 1,2X8,0 VDE |
| 1201659 E/AL-NS 32 |
| 1201662 E/AL-NS 35 |
| Bridge List |
fixed bridge/FBI 2-20-EX / 0201113 |
| fixed bridge/FBI 3-20-EX / 0201812 |
| Bridge Data |
130.5 A (50 mm²) |
| explosion-proof temperature rise |
40 K (146.5 A / 50 mm²) |
| Nominal operating voltage |
690V |
| for bridging with bridges |
690V |
| Rated insulation voltage |
630V |
| Output |
(permanent) |
| Ex Level regular |
| Rated current |
133 A |
| Maximum load current |
133 A |
| contact resistance |
0.1 mΩ |
| Ex Connection Data Overview |
| Torque range |
6 Nm ... 8 Nm |
| Rated cross section |
50 mm² |
| Rated wiring capacity AWG |
1/0 |
| Rigid Wiring Capacity |
16 mm² ... 50 mm² |
| Wiring capacity AWG |
6 ... 1/0 |
| flexible wiring capacity |
25 mm² ... 50 mm² |
| Wiring capacity AWG |
4 ... 1/0 |
| 2 wires of the same cross section, rigid wire |
10 mm² ... 16 mm² |
| 2 wires of the same cross section, AWG Rigid |
8 ... 6 |
| 2 wires with the same cross section, flexible wire |
10 mm² ... 16 mm² |
| 2 wires of the same cross section, AWG flexible |
8 ... 6 |
