Phoenix PSI-MOS-PROFIB/FO1300 T-FO converter 2708892, fiber optic converter, built-in optical signal diagnostic function, alarm contact, for PROFIBUS up to 12Mbps, T-coupler with 2 fiber optic interfaces (SC duplex), 1300nm, for glass fiber
| Application Description |
| Application Description |
for industrial applications only |
| Use Restrictions |
| CCCex Description |
is not permitted in China for use in potentially explosive areas. |
| Product Type |
Media Converter |
| MTTF |
614 years (SN 29500 standard, temperature 25°C, duty cycle 21%) |
| 272 years (SN 29500 standard, temperature 40°C, duty cycle 34.25%) |
| 113 years (SN 29500 standard, temperature 40°C, duty cycle 100%) |
| MTBF |
307 years (Telcordia standard, temperature 25°C,21% operation cycle (5 days a week, 8 hours a day)) |
| 64 years (Telcordia standard, temperature 40°C,34.25% operation cycle (5 days a week, 12 hours a day)) |
| electrical isolation |
VCC // RS-485 |
| rated conditions |
2.04W |
| test voltage data interface/power supply |
1.5 kVrms(50 Hz,1 min) |
| Power |
| Supply Voltage Range |
18V DC ... 32V DC (via plug-in COMBICON screw terminal blocks) |
| Rated supply voltage |
24V DC (UL compliant) |
| Typical current consumption |
85 mA (24V DC) |
| Maximum current consumption |
145 mA |
| ≤ 2 A (via DIN rail connector when running in connection site) |
| switching |
| Output Name |
relay output |
| Output Description |
Alarm output |
| outputs |
1 |
| maximum switching voltage |
60V DC (resistive load, universal load) |
| 30V AC (resistive load) |
| 42V AC (peak, resistive load) |
| limit continuous current |
0.46 A |
| Power |
| Connection Mode |
plug-in COMBICON screw terminal block |
| stripping length |
7.00mm |
| Tightening torque |
0.56 Nm ... 0.79 Nm |
| -bit distortion, input |
± 35% (allowed) |
| -bit distortion output |
< 6.25% |
| bit delay |
< 1 Bit (DIP 7 = OFF, standard run) |
| 11 Bit (DIP 7 = ON, redundant operation) |
| signal |
PROFIBUS |
| data: optical fiber |
| Channels |
2 |
| minimum transmission power |
-3.4 dBm (50/125 μm, multimode fiber) |
| -4.7 dBm (62.5/125 μm, multimode fiber) |
| -5.5 dBm (9/125 μm, single mode fiber) |
| transmission length, including 3 dB system margin |
25km (F-G 50/125 0.7dB/km,1300nm) |
| 22 km (F-G 62.5/125 0.8 dB/km at 1300 nm) |
| 45 km (with F-E 9/125 0.4 dB/km at 1300 nm) |
| Transfer Protocol |
RS-485 interface, protocol transparency |
| Connection Mode |
SC Duplex |
| wavelength |
1300 nm |
| Minimum Receiving Sensitivity |
-25.5 dBm (multimode) |
| -26.5 dBm (single mode) |
| receiver |
0 dBm |
| transmission medium |
multimode glass fiber |
| single-mode glass fiber |
