Phoenix DFLK-D62 SUBH/S-terminal module 2300863,VARIOFACE through-board straight-through module, used for direct coupling connection of signal lines, wiring capacity of 2.5 mm2, with D-SUB micro-pin connectors and connecting screws, number of bits: 62
Product Type | Interface Module |
product series | VARIOFACE |
Bits | 62 |
insulation characteristics: electrical clearance and creepage distance | |
insulation | Functional insulation |
Overvoltage Category | II |
pollution level | 2 |
Nominal operating voltage (AC) | ≤ 30V AC |
Nominal operating voltage (DC) | ≤ 60V DC |
current (per branch) | ≤ 0.5 A |
electrical clearance and creepage distance | |
Rated insulation voltage | 125V |
Rated overvoltage | 1.2 kV (1.2 / 50 μs) |
Interface 1 (Control Layer) | |
connection meets standards | IEC 60807-2 |
Connection Mode | D-SUB Pin Connectors |
thread | UNC 4-40 |
connection quantity | 1 |
Bits | 62 |
Insertion/unplugging cycle | > 500 |
needle pitch | 2.41mm |
interface 2 (field side) | |
Connection Mode | screw connection |
stripping length | 8mm |
thread | M3 |
Bits | 16 |
Rigid conductor cross section | 0.2 mm² ... 4 mm² |
rigid wire cross section (2 wires with the same cross section) | 0.2 mm² ... 1.5 mm² |
Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
0.25 mm² ... 2.5 mm² (cold press head without plastic sleeve) | |
0.25 mm² ... 2.5 mm² (cold press head with plastic sleeve) | |
flexible wire cross section (2 wires with the same cross section) | 0.2 mm² ... 1.5 mm² |
0.25 mm² ... 0.75 mm² (cold press head without plastic sleeve) | |
0.5 mm² ... 1.5 mm² (TWIN sleeve with plastic insulating sleeve) | |
Attachable Guide Cross Section AWG | 24 ... 12 |
Tightening torque | 0.5 Nm ... 0.6 Nm |
needle pitch | 5mm |
Status Display | None |
Status Display | No |
Product Size | |
width | 40.4mm |
height | 180mm |
color | gray (RAL 7042) |
Shell insulation material | polyamide PA non-reinforced |