Phoenix QUINT-PS/1AC/48DC/20-power supply 2866695, primary switching power supply QUINT POWER, screw connection, SFB Technology (Selective Fuse Breaking), input: 1 phase, output: 48V DC/20 A
| AC operation |
| Rated input voltage range |
100V AC ... 240V AC |
| 120V DC ... 300V DC (UL 508: ≤ 250V DC) |
| Input Voltage Range |
85V AC ... 264V AC |
| 90V DC ... 300V DC (UL 508: ≤ 250V DC) |
| AC input voltage range |
85V AC ... 264V AC |
| DC input voltage range |
90V DC ... 300V DC (UL 508: ≤ 250V DC) |
| maximum dielectric strength |
300V AC |
| Supply Voltage |
AC/DC |
| Impulse current |
< 15 A (typical) |
| impulse current integral (I2t) |
< 1.6 A2s |
| AC frequency range |
45Hz ... 65Hz |
| DC frequency range |
0Hz |
| grid buffer time |
Typical 20 ms (120V AC) |
| Typical 22 ms (230V AC) |
| power consumption |
8.7 A (120V AC) |
| 4.5 A (230V AC) |
| 9.4 A (110V DC) |
| 4.6 A (220V DC) |
| Rated power consumption |
1046 VA |
| protection circuit |
transient surge protection; varistor |
| Typical Response Time |
< 0.65 s |
| input fuse |
20 A (fast fuse, built-in) |
| Allowable Spare Fuses |
B16 B25 AC: |
| Allowed DC Spare Fuses |
DC: Connect a suitable fuse |
| recommend use |
6 A ... 16 A (AC: characteristics B, C, D, K) |
| PE discharge current |
< 3.5 mA |
| efficiency |
> 93% (230V AC and rated) |
| Rated output voltage |
48V DC ±1% |
| output voltage (USet) setting range |
30V DC ... 56V DC (> 48V DC, limited stable capacity) |
| Rated output current (IN) |
20 A (-25°C ... 60 °C,UOUT= 48V DC) |
| POWER BOOST (IBoost) |
22.5 A (-25°C ... 40°C constant, UOUT= 48V DC) |
| selective fusing (ISFB) |
100 A (12 ms) |
| Type of thermal magnetic circuit breaker |
B2 / B4 / B6 / B10 / C2 / C4 / C6 |
| Attenuation |
60°C ... 70°C (2.5 %/K) |
| feedback voltage resistance |
maximum 60V DC |
| output |
< 60V DC |
| Active Current Limit |
IBOOSTapprox. 22.5A (in case of short circuit) |
| control deviation |
<1% (load change, static 10%... 90%) |
| <3% (load change, dynamic 10%... 90%) |
| < 0.1 % (input voltage variation is ± 10 %) |
| residual wave |
< 50 mVSS(rated value) |
| output power |
960W |
| maximum no-load power consumption |
12W |
| Maximum rated load power loss |
74W |
| rise time |
< 0.05 s (UOUT(10%... 90%)) |
| and connect |
Yes, for redundancy and increased capacity |
| Concatenation |
is |
| signal: DC OK active |
| Output Description |
UOUT>0.9xUN: High Signal |
| Switching voltage range |
18V DC ... 24V DC |
| Maximum starting current |
≤ 20 mA (short-circuit protection) |
| Continuous load current |
≤ 20 mA |
| signal: DC OK floating point |
| Output Description |
relay contacts, UOUT>0.9xUN: contact attraction |
| maximum switching voltage |
30V AC/DC |
| 24V DC |
| Maximum starting current |
0.5 A |
| 1 A |
| Continuous load current |
≤ 1 A |
