Phoenix VAL-MS BE - 2 type surge protector base 2817741, the base is matched with the VALVETRAB MS series type 2 protector. Model: single channel
| Product Type | basic elements |
| Product Series | VALVETRAB MS |
| IEC Category | II |
| T2 | |
| EN Type | T2 |
| type | base element, DIN rail mounting |
| Bits | 1 |
| Surge protection fault alarm | None |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated frequency fN | 50Hz (60 Hz) |
| Connection Mode | screw connection |
| thread | M5 |
| Tightening torque | 3 Nm (1.5 mm² ... 16 mm²) |
| 4.5 Nm (25 mm² ... 35 mm²) | |
| stripping length | 16mm |
| Flexible Wire Cross Section | 1.5 mm² ... 25 mm² |
| Rigid conductor cross section | 1.5 mm² ... 35 mm² |
| Attachable Guide Cross Section AWG | 15 ... 2 |
| Connection Mode | fork cable end |
| Flexible Wire Cross Section | 1.5 mm² ... 16 mm² |
| Dimensional drawing | |
| width | 17.6mm |
| height | 89.8mm |
| depth | 51.5mm (7.5mm with DIN rail) |
| Horizontal stitch pitch | 1 Partition |
| color | black (RAL 9005) |
| flame retardant rating to UL 94 | V-0 |
| material | 600 |
| insulation material | PA 6.6 |
| Material Group | I |
| Shell Material | PA 6.6 |
| Mechanical parameters | |
| Open Side Panel | No |
| movement direction | 1L-N/PE |
| Rated frequency fN | 50Hz (60 Hz) |
| Maximum continuous voltage Uc | 600V AC |
| Rated load current IL | 80 A |
| Rated short-circuit current ISCCR | 25 kA |
| Maximum spare fuse with V-connection wire | 80 A (gG) |
| maximum spare fuse with branch wiring | 125 A (gG) |
| environmental conditions | |
| protection level | IP20 (only if all connection bits are used) |
| ambient temperature (operation) | -40°C ... 80°C |
| ambient temperature (storage/transport) | -40°C ... 80°C |
| elevation | ≤ 2000 m (amsl) |
| Allowable humidity (operating) | 5%... 95% |
| Impact Force (Operation) | 25g (half sine/11 ms/ 3x ± X,± Y, ± Z) |
| vibration (operation) | 5g (10 ... 500Hz / 2.5 h / X,Y,Z) |