Phoenix REL-MR-230AC/21HC AU-single relay 2961529, plug-in miniature power relay, with multi-layer gold-plated contacts, suitable for high continuous current, 1 PDT, input voltage 230V AC
Product Type
Single relay
Mode of operation
100% operating factor
mechanical life
1x 107cycle
insulation characteristics
Overvoltage Category
III
pollution level
3
Data Management Status
Last data maintenance date
17.01.2025
service life, electrical
See Graph
rated conditions
0.69W
test voltage (coil/contact)
5 kV AC (50Hz,1 min, coil/contact)
coil side
Rated input voltage UN
230V AC
Input Voltage Range
179.4V AC ... 356.5V AC
mains frequency
50/60Hz
drives and functions
monostable
drive (polarity)
Inpolarity
UN
3 mA (50Hz)
2.5 mA (60Hz)
Typical Response Time
3 ms ... 12 ms (depending on phase)
Typical Release Time Range
2 ms ... 9 ms (depending on phase)
coil resistance
32500 Ω ± 15% (at 20°C)
switching
Contact Type
1 changeover contact
Switch Contact Type
single contact
Contact Material
AgNi, hard gold plating
maximum switching voltage
30V AC
36V DC
Minimum Switching Voltage
100 mV (at 10 mA)
limit continuous current
50 mA
Maximum starting current
50 mA
minimum switching current
1 mA (24 V)
Maximum power rating (resistive load)
1.2W (24V DC)
switch capacity
2 A (24V, AC15)
switching: when the gold plating layer is destroyed
Considerations
If the gold plating is damaged, the following values are applicable.
