Phoenix ILC 2050 BI-L-Controller 2404671, a modular Inline controller for automation applications in building technology, infrastructure and energy technology. Equipped with two logically separated IP address interfaces, each interface has two integrated Fast Ethernet ports. Configurable Ethernet port assignment using spanning tree protocol, daisy chain, and redundant ring architecture for optimal availability. Integrated with 4 LAN, 2 USB and 2 RS-485 interfaces. It can be used to directly connect to LonMark TP/FT-10 networks. The connection of data points can be extended to a maximum of 63 Inline I/O modules.
| Product Type | controller |
| Product Series | Inline-Controller |
| type | Module |
| Processor | Arm®Cortex®-A8 1 GHz |
| reserved data storage | 2 Gigabytes GByte (eMMC) |
| RAM | 1024 Mbyte DDR3 SDRAM |
| IEC 61131 runtime system | |
| Program Memory | 1 Gigabyte GByte (SRAM) |
| data storage system | 1.8 Gigabyte GByte (eMMC) |
| Function | |
| Supported Programming Languages | Niagara Framework® |
| System Requirements | |
| Engineering Design Tools | Emalytics |
| Power | |
| supply voltage | 24V DC |
| Supply Voltage Range | 19.2V DC ... 30V DC |
| Maximum current consumption | ≤ 1.5 A |
| Typical current consumption | ≤ 170 mA (rated voltage without local bus device) |
| Real Time Clock | |
| Real Time Clock | is |
| Real Time Clock Description | integrated (buffered rechargeable battery) |
| potential | |
| supply voltage | 24V DC-15%/+ 20% (conforming to EN 61131-2) |
| Supply Voltage Range | 19.2V DC ... 30V DC |
| Inline connector | |
| Connection Mode | pull-back spring connection |
| Hard Wire Cross Section | 0.08 mm² ... 1.5 mm² |
| Flexible Wire Cross Section | 0.08 mm² ... 1.5 mm² |
| Connectable Guide Cross Section AWG | 28 ... 16 |
Phoenix ILC 2050 BI-L-Controller 2404671
