Phoenix MACX MCR-EX-SL-SD-21-25-LP-electromagnetic driver 2865492,Ex I electromagnetic driver. Intra-safe control of Ex I solenoid valves, alarm modules or LEDs installed in the Ex area. Current limit 25 mA. For the highest IIC group gases, loop powered, electrical isolation, SIL 3. Screw connection method.
| Product Type | Electromagnetic driver |
| product series | MACX Analog |
| Channels | 1 |
| Model | Ex I Isolation Amplifier with SIL Functional Safety |
| compatible valve | Norgren Herion Coil 2080 / 2082 |
| Norgren Herion Coil 2081 / 2083 | |
| Norgren Herion Coil 2084 | |
| Hörbiger Piezo P8 38x RF-Nx-SPN65 30V type | |
| Hörbiger Piezo P20 381RF-NG-CPN61 30V type | |
| Samson Coil 3701-11 (6 V) | |
| Samson Coil 3701-12 (12 V) | |
| Samson Coil 3701-13 (24 V) | |
| Samson Coil 3963-11 (6 V) | |
| Samson Coil 3963-12 (12 V) | |
| Samson Coil 3963-13 (24 V) | |
| Samson Coil 3964-11 (6 V) | |
| Samson Coil 3964-12 (12 V) | |
| Samson Coil 3964-13 (24 V) | |
| Seitz Pilot valve PV 12F73 Ci oH | |
| Seitz Pilot valve PV 12F73 Xi oH | |
| Seitz Pilot valve PV 12F73 Xi oH-2 | |
| Considerations | This is a summary of possible valves and solenoid actuators. |
| electrical isolation | 2 road isolation |
| maximum temperature coefficient | 0.01 %/K |
| electrical isolation | |
| Test Voltage | 2.5 kV AC (50 Hz, 60 s) |
| Overvoltage Category | II |
| pollution level | 2 |
| galvanically isolated output/input IEC/EN 60079-11 | |
| Standards/Regulations | IEC/EN 60079-11 |
| Rated insulation voltage | 375VPP |
| galvanically isolated output/input IEC/EN 61010-1 | |
| Standards/Regulations | IEC/EN 61010-1 |
| Rated insulation voltage | 300Vrms |
| insulation | security isolation |
| power supply | |
| Supply Voltage Range | loop power supply, no external power supply required |
| power consumption | < 0.845W |
| signals: voltage | |
| Number of inputs | 1 |
| voltage input signal | 19.2V DC ... 30V DC (24V DC,-20 % ... +25 %) |
| Maximum current input signal | 45 mA (Ue= 24V DC) |
| signals: voltage | |
| Output Description | Inoriginal Safety |
| outputs | 1 |
| output voltage | ≥ 5.5V DC (25 mA) |
| Current Limit | > 25 mA |
| response time | < 20 ms |
| No-load voltage | > 21.9V DC |
| Short-circuit protection | is |
Phoenix MACX MCR-EX-SL-SD-21-25-LP-Electromagnetic Driver 2865492
